Sturm Professional AG9018P
 |
 |
Close
Sturm Professional AG9018P | |||||||||||||||||||||
| |||||||||||||||||||||
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Sturm 2025 - new arrivals, bestsellers, and the most relevant models Sturm.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Sturm 2025 - new arrivals, bestsellers, and the most relevant models Sturm.
How to choose an angle grinderBrief instructions for choosing a grinder
How does an expensive grinder differ from a cheap one?Design features and other factors affecting the quality and price of an angle grinder
Series Sturm Professional
inverter, welding: MMA, welding current: from 20 A, up to 300 A, электрод до 5 mm, power supply: 230 В, from 160 В, display
hammer drilling, 4300 bpm, without a hit, 850 rpm, chiselling, 1800 W, 6.5 J, weight 5 kg
drill, gun, 1050 W, 2800 rpm, 1 speed, cartridge: key, Ø 13 mm, impact mode, reverse, power supply: mains (230 V)
950 W, from 800 stroke/min, up to 3000 stroke/min, stroke: pendulum action, dust blower, LED light, weight: 3.1 kg
inverter, welding: MMA, welding current: from 20 A, up to 235 A, электрод до 5 mm, power supply: 230 В, from 160 В, display
hammer drilling, 4400 bpm, without a hit, 1100 rpm, chiselling, 1200 W, 3 J, weight 3.1 kg
drill, gun, 1050 W, 2800 rpm, 1 speed, cartridge: keyless, Ø 13 mm, impact mode, reverse, power supply: mains (230 V)
inverter, welding: MMA, welding current: from 20 A, up to 355 A, электрод до 5 mm, power supply: 230 В, from 160 В, display
drill, gun, 1150 W, 3200 rpm, cartridge: key, Ø 13 mm, impact mode, reverse, power supply: mains (230 V)
semi-automatic inverter, welding: MMA, MIG/MAG, welding current: from 20 A, up to 310 A, электрод до 5 mm, wire: from 0.6 mm, up to 1.2 mm, power supply: 230 В, display
angle grinder, 2700 W, saw blade 230 mm, 6500 rpm, soft start, rotary main handle, additional handle
drill driver, gun, 550 W, 400/1600 rpm, cartridge: keyless, Ø 10 mm, reverse, power supply: mains (230 V)
inverter, welding: MMA, welding current: from 20 A, up to 275 A, электрод до 5 mm, power supply: 230 В, from 160 В, display
not heavy, sits well in the hands, works confidently the power button is not protected from dust (this is being solved), obviously overpriced  Viktor: use Sturm Professional AG9018P few months |
They took on the production of processing stone and concrete. During the year of work, only two pairs of electric brushes were changed, there were no failures, and this was with a rather dirty and dusty work. So, for the money, a very decent machine. Softness of work, sufficient power, non-failure operation. Not a rotary handle, no soft start, although this does not cause any particular inconvenience. use Sturm Professional AG9018P more than year |
2 out of 3 user review(s) shown
1 more user review(s)
We recommendCompare using chart →
angle grinder, 2200 W, saw blade 180 mm, 8400 rpm, soft start, rotary main handle, additional handle
angle grinder, 1970 W, saw blade 180 mm, 4000 – 8000 rpm, speed controller, additional handle
angle grinder, 2200 W, saw blade 180 mm, 8000 rpm, soft start, speed controller, additional handle
angle grinder, 1800 W, saw blade 180 mm, 8000 rpm, rotary main handle, additional handle
angle grinder, 2000 W, saw blade 180 mm, 2500 – 8500 rpm, soft start, speed controller, motor protection, additional handle
angle grinder, 1700 W, saw blade 180 mm, 2600 – 8300 rpm, speed controller, additional handle
I installed a 150mm cover and a 125mm disc.
I cut concrete, it works alright, and I take a break every approximately 10 minutes of work (when it heats up).
After a couple of hours of work, without any warnings, it stopped turning on.
I had to look inside the product - it was just that the brush tail had fallen off - I got away with a small fright.
Spare brushes were included in the set - I replaced them.