Teltonika RUT950
 |
 |
Close
Teltonika RUT950
WAN:Ethernet, SIM card
Connection:LAN 3 ports, 100 Mbps
Wi-Fi:Wi-Fi 4 (N)
Antennas and signal:2 antenna(s), removable
In the settings of the WAN router, the port can be redefined to LAN. It is possible to load balance across multiple WAN connections. Network speed 4G (LTE) up to 150 Mbps, 3G - up to 42 Mbps, 2G - up to 236.8 Kbps.
PoE is not compatible with the IEEE802.3af and 802.3at standards.
All specifications
Specifications RUT950
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Teltonika 2025 - new arrivals, bestsellers, and the most relevant models Teltonika.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Teltonika 2025 - new arrivals, bestsellers, and the most relevant models Teltonika.
Wi-Fi classes in routers: what they are and how they affect Internet speedDeciphering and analysis of all current classes of routers
Wi-Fi without blind areas: stable signal throughout the house or apartmentSimple and efficient ways to ensure stable Wi-Fi signal in small and large rooms
AccessoriesAll accessories for Teltonika RUT950 →
Richly improved and robotic modes, 4g speed is shorter than lower on high-end modems from huawei. Even an unmanageable web interface, Syrian software.  Anton Kukoba: use Teltonika RUT950 few months |
Add Review
Video reviews
Обзор LTE-маршрутизаторов Teltonika RUT950 и Teltonika RUT955
27 March 20196 623 view
Teltonika RUT950 4G router
29 May 201515 502 view
Teltonika RUT950 LTE 4G Router - QUICK UNBOXING & SPECIFICATIONS 4K
5 February 20184 883 view
We recommendCompare using chart →
router, PoE power, balancing (Dual WAN), WAN: Ethernet, SIM card, 3G via USB, 4G LTE over USB, Cat.4, connection: LAN 3 ports, 100 Mbps, Wi-Fi: Wi-Fi 4 (N), detachable
router, WAN: Ethernet, connection: LAN 3 ports, 1 Gbps, Wi-Fi: Wi-Fi 6 (AX), 2.4 ГГц — 800 Mbps, 5 ГГц — 2402 Mbps, Dual-band, MU-MIMO, Beamforming
wi-Fi booster, WAN: Ethernet, connection: LAN 1 port, 100 Mbps, Wi-Fi: Wi-Fi 5 (AC), 2.4 ГГц — 300 Mbps, 5 ГГц — 867 Mbps, Dual-band
router, WAN: Ethernet, connection: LAN 3 ports, 1 Gbps, Wi-Fi: Wi-Fi 5 (AC), 2.4 ГГц — 300 Mbps, 5 ГГц — 867 Mbps, Dual-band, MU-MIMO
router, WAN: Ethernet, connection: LAN 4 ports, 1 Gbps, Wi-Fi: Wi-Fi 5 (AC), 2.4 ГГц — 400 Mbps, 5 ГГц — 867 Mbps, Dual-band, MU-MIMO, Beamforming
router, balancing (Dual WAN), WAN: Ethernet, connection: LAN 4 ports, 1 Gbps, Wi-Fi: Wi-Fi 6 (AX), 2.4 ГГц — 574 Mbps, 5 ГГц — 2402 Mbps, 160 МГц, Dual-band, MU-MIMO, Beamforming
router, WAN: Ethernet, connection: LAN 2 ports, 1 Gbps, Wi-Fi: Wi-Fi 5 (AC), 2.4 ГГц — 600 Mbps, 5 ГГц — 1300 Mbps, Dual-band, MU-MIMO, powerful transmitter, Beamforming
router, WAN: Ethernet, connection: LAN 4 ports, 1 Gbps, Wi-Fi: Wi-Fi 6 (AX), 2.4 ГГц — 300 Mbps, 5 ГГц — 1201 Mbps, Dual-band, MU-MIMO, Beamforming
router, WAN: Ethernet, connection: LAN 4 ports, 1 Gbps, есть WAN/LAN, Wi-Fi: Wi-Fi 6 (AX), 2.4 ГГц — 574 Mbps, 5 ГГц — 2402 Mbps, 160 МГц, Dual-band, MU-MIMO, Beamforming
router, WAN: Ethernet, connection: LAN 4 ports, 100 Mbps, Wi-Fi: Wi-Fi 5 (AC), 2.4 ГГц — 300 Mbps, 5 ГГц — 867 Mbps, Dual-band, MU-MIMO, Beamforming
router, WAN: Ethernet, connection: LAN 4 ports, 1 Gbps, Wi-Fi: Wi-Fi 6 (AX), 2.4 ГГц — 574 Mbps, 5 ГГц — 2402 Mbps, 160 МГц, Dual-band, MU-MIMO, Beamforming
Firstly, it’s like a fun quest just to switch the device to use the 4G modem as an internet source and to find where you can manually restart the 4G connection. Then, another quest to figure out how to make it switch between SIM cards. After experimenting, it turned out that with our mobile operators, sometimes DNS pings work, but the traffic doesn't go through. And this router can’t detect that at all. So, you have 4G connection, but no internet, and it can't restart the modem or switch to another SIM card. You have to do it manually. Moreover, it periodically freezes, making it impossible to access it via the web interface.
Later, when I realized the quarantine would last a while, I ran cable internet to myself and tried to use it as a Wi-Fi router. And here too, issues arose; if the number of Wi-Fi clients exceeds 10-12, it just restarts or kicks "extra" ones off the network.
Yes, it has great logs (but you need to find them first), which Linux users might analyze and perhaps easily resolve the described issues, but that’s definitely not me.