Vitals Master TS 7280BDs
 |
 |
Close
Vitals Master TS 7280BDs | ||||||||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||||||||
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Buy Vitals Master TS 7280BDs
Плиткоріз Vitals Master TS 7280BDs 203069 | 13 605 ₴ |  | |||
| 13 605 ₴ |  | ||||
| 14 999 ₴ |  | ||||
| 13 470 ₴ | | ||||
| 13 605 ₴ | | ||||
Series Vitals Master (semi-pro)
semi-automatic inverter, synergistic, welding: MMA, MIG/MAG, TIG, welding current: from 20 A, up to 140 A, электрод до 4 mm, wire: from 0.8 mm, up to 1 mm, power supply: 230 В, from 160 В
chainsaw, electric saw, 2400 W, bar/blade 400 mm, chain pitch 3/8 ", motor protection, keyless tension, weight 5.3 kg
brushless, 1650 W, 120 bar, nozzles: fan-shaped, foam gun, water suction, pressure gauge, weight 10 kg
drill driver, gun, 700 W, 400/1500 rpm, cartridge: keyless, Ø 10 mm, reverse, power supply: battery, 18 H, case
random orbital, 300 W, saw blade 125 mm, 2000 – 6000 rpm, frequency 4000 – 12000 opm, amplitude 3 mm, speed controller, additional handle, dust collector
electric (230 V), at the entrance 380 L/min, at the exit 230 L/min, 8 bar, 2.2 kW, receiver: 55 L, direct drive
800 W, from 800 stroke/min, up to 3000 stroke/min, stroke: 23 mm, pendulum action, dust blower, LED light, laser marker, weight: 2.5 kg
3000 rpm, 63 cm³, drive unit mechanical, 2.2 kW, 3 hp, 2 operators, boer: diameter 40 cm
hammer drilling, 4500 bpm, without a hit, 900 rpm, 0.9 J, power battery, 18 В, not included, LED light, weight 1.5 kg
paint sprayer, corded, 500 W, consumption 0.85 L/min, nozzle 2.6 mm, storage tank: 700 mL, remote compressor
12 kN, frequency 680 VPM, petrol, 4.7 kW, seal: 450 mm, sole: length 345 mm, width 285 mm
maximum 3.8 kW, 230 B, petrol, 4-stroke, tank 16 L, sockets 2, output 12V, electric starter, hour metre, 595х445х505 mm, 43.6 kg
stationary electro, network, 800 W, 2950 rpm, disk: 200 mm, cutting length: длина реза до 720 mm, глубина реза до 36 mm, water cooling
semi-automatic inverter, synergistic, welding: MMA, MIG/MAG, TIG, welding current: from 30 A, up to 180 A, электрод до 4 mm, wire: from 0.8 mm, up to 1 mm, power supply: 230 В, from 160 В, display
We recommendCompare using chart →
stationary electro, network, 800 W, 2990 rpm, disk: 200 mm, cutting length: длина реза до 720 mm, глубина реза до 32 mm, water cooling
stationary electro, network, 800 W, 3000 rpm, disk: 200 mm, cutting length: длина реза до 610 mm, глубина реза до 35 mm, water cooling
stationary electro, network, 800 W, disk: 200 mm, cutting length: длина реза до 520 mm, глубина реза до 36 mm, water cooling
stationary electro, network, 1200 W, 2950 rpm, disk: 230 mm, cutting length: длина реза до 920 mm, глубина реза до 45 mm, water cooling
stationary electro, network, 2200 W, 2800 rpm, disk: 350 mm, cutting length: длина реза до 700 mm, глубина реза до 100 mm, water cooling
portable electro, network, 1250 W, 12000 rpm, disk: 125 mm, глубина реза до 36 mm, water cooling