Vitals Master BUM 632n (195628)

chainsaw, 1200 W, canvas 350 mm, chain pitch 3/8 ", weight 5.3 kg

semi-automatic inverter, synergistic, welding: MMA, MIG/MAG, TIG, welding current: from 20 A, up to 140 A, электрод до 4 mm, wire: from 0.8 mm, up to 1 mm, power supply: 230 V, from 160 V

cordless pruner, 18 V, slice: 30 mm, pens: plastic, detachable blade

drill driver, gun, 300 W, 500/1800 rpm, cartridge: keyless, Ø 10 mm, reverse, power supply: mains (230 V)

brushless, 1650 W, 120 bar, nozzles: fan-shaped, foam gun, water suction, pressure gauge, weight 10 kg

vertical, 1600 W, up to 30000 rpm, stroke: 60 mm, soft start, fine height adjustment

angle grinder, 860 W, saw blade 125 mm, 2000 – 11000 rpm, speed controller, additional handle

electric (230 V), at the entrance 380 L/min, at the exit 230 L/min, 8 bar, 2.2 kW, receiver: 55 L, direct drive

hammer drilling, 5100 bpm, without a hit, 1300 rpm, chiselling, 850 W, 3.2 J, quick cartridge change, weight 5.6 kg

maximum 3.8 kW, 230 V, petrol, 4-stroke, tank 11 L, sockets 2, USB, electric starter, wheels, soundproof, hour metre, 605x482x520 mm, 43 kg

pole saw, mains, 710 W, tyre 250 mm, rod 320 cm, telescopic, adjustable attachment

plaster mixer, 1400 W, 480/800 rpm, spindle: M14, 2 speeds

planing: width 82 mm, depth 2 mm, 650 W

800 W, from 800 stroke/min, up to 3000 stroke/min, stroke: 23 mm, pendulum action, dust blower, LED light, laser marker, weight: 2.5 kg

3000 rpm, 63 cm³, drive unit mechanical, 2.2 kW, 3 hp, 2 operators, boer: diameter 40 cm

wall chaser, electric, 230 V, disc/cutter: 5, 150 mm, power consumption 2.4 kW, case

20 kN, frequency 5500 VPM, petrol, seal: 350 mm, sole: length 590 mm, width 500 mm

1700 W, 46 J, 1400 bpm, cartridge: SDS Hex, soft start, 18.2 kg

paint sprayer, corded, 500 W, consumption 0.85 L/min, nozzle 2.6 mm, storage tank: 700 mL, remote compressor

chainsaw, electric saw, 2200 W, canvas 450 mm, chain pitch 3/8 ", keyless, weight 5.8 kg