TOP-5 single tents for different budgets

The tent is quite versatile in use. A weekend hike, fishing, a mini-vacation in nature, a bike ride will pass without trouble. The manufacturer uses a semi- barrel form factor to achieve maximum comfort for the user. The length of the bed is 220 cm with a width of 65 cm, so a tall person of large build can be accommodated inside. The displacement of the inner tent made it possible to implement a small vestibule 40 cm long, which is enough to store a hiking backpack, shoes and any small things. In addition, the two-layer construction reduces vibration and noise. And at the same time, the tent weighs only 1.8 kg. In 2023, the manufacturer released an updated model in blue Robens Arrow Head 1 (130342), which acquired a loop for a flashlight.

Durable polyester, from which the outer tent and the bottom are made, are designed for significant precipitation (3000 and 6000 mm w.st., respectively), for example, rain for several hours. Guys are located in the most important places, excluding capsizing, rupture of the canvas, deformation of the arches during gusts of wind up to 165 km/h (according to the manufacturer's tests). The design provides for ventilation windows, and for safety in severe weather, wind valves are implemented that will provide oxygen and protect against condensate. Arcs made of anodized aluminium have an optimal ratio of flexibility / strength, are not subject to corrosion.

The material with refractory impregnation is not subject to ignition in case of accidental contact with sparks from a fire, a cigarette. Even with full contact with the flame, the tent simply melts, allowing you to react to the situation.

For many years Ferrino Lightent 1 has been in high demand due to its versatility and quality. Now it has been replaced by the Ferrino Lightent 1 Pro tent. The outer tent and bottom are made from recycled polyester for a sustainable production. The manufacturer has abandoned harmful PFC compounds and uses environmentally friendly DWR (Durable Water Repellent) impregnation, which does not interfere with air exchange. A three-layer bottom corner structure is used and all seams are reinforced. Even prolonged rains can be comfortably waited out thanks to the high water-repellent properties of the awning (3000 mm H. St.) and the bottom (8000 mm H. St.). The tent is quite light (1.55 kg), like the entire Lightent series, therefore it is recommended by professionals for traveling in any weather from March to November.

The Ferrino Lightent 1 consists of an outer tent and an inner tent, which can be used separately. The awning can serve as a canopy, a warehouse for products. It will protect from direct sunlight, moisture, precipitation. The tent itself sets up very quickly with the help of aluminium poles and hexagonal pegs, which are very difficult to bend even in strong winds. The polyester mosquito net is the main material of the tent, guaranteeing insect protection and a pleasant outdoor experience.

The shape of the semi-barrel provides a large space inside (215x75 cm excluding the vestibule), which will be appreciated by people of different builds. Tourist lantern can be hung on the inner loop. Smartphone, power bank and personal care items are always available thanks to the pockets.

The tent in the form of a hemisphere has increased wind resistance, so it is suitable for amateurs and professionals. The manufacturer focused on the convenience of staying inside, increasing the bed (120x230 cm) at the expense of weight. A caring father can take a child 4-7 years old with him on a picnic. The tent is easily transported in a car or by bicycle, but for long hikes it can be a “heavy burden” since the weight is 2.35 kg. The design provides vestibulewhere you can leave shoes, wet clothes, a backpack. With the placement of small things can be difficult, since there are simply no inside pockets.

The indoor unit is fixed with the help of 3 arcs, which securely “glue” the frame into a single whole, ensuring stability in any bad weather. Thanks to this, the tent can be set up without the use of pegs, for example, on rocky surfaces when kayaking, hiking in the mountains.

Polyester awning and polyethylene bottom reinforced with polyurethane impregnation, have basic water-repellent properties. The material will cope with light rain, but it is better not to go traveling during the rainy season. In the summer, a mosquito net tent will get rid of annoying mosquitoes and flies, give you an unforgettable experience of spending the night under the stars.

In general, the tent is more suitable for short trips, cycling. The emphasis is on convenience and cost reduction.

The tent of the American company MSR (Mountain Safety Research) impresses with its size. One of the features is a spacious vestibule 76 cm, where you can securely hide personal belongings, a field kitchen, fishing gear and much more. If desired, an adult and a child or 2-3 children can be accommodated here, since the bed reaches 216x76 cm. Stay-Dry entrance with built-in drain grooves and sealed seams prevent moisture from entering. , but summer holidays with her will be really comfortable.

The manufacturer used nylon to create the awning and the bottom of the tent. This allowed to reduce the weight to 1.12 kg. With such a load, a child from 6 years old can easily cope. The compression bag for transport can be attached to the backpack while cycling without the risk of overloading. The aluminium hub construction of the DAC Featherlite NFL also provides a reduction in weight compared to fiberglass while increasing flexibility and strength.

The DuraShield polyurethane and silicone coated outer tent prevents condensation and can be set up independently of the tent. The manufacturer offers an additional accessory - MSR Univerzal Footprints, which will replace the bottom. There are many combinations, which is undoubtedly a plus. The slings are reinforced and allow you to adjust the tension, so the pegs do not need to be driven in several times.

A reliable HUB-frame of two Y-shaped and one straight arcs forms a stable position of the tent. The shape of the hemisphere indicates increased wind resistance and resembles a cobweb from above, as the name Spider also speaks of. The inner tent is quickly fastened with carabiners, and the top tent is pulled evenly from above. Depending on weather conditions and goals, parts of a single tent can be used as independent components. This will further reduce the weight of an already light (1.5 kg) design. Assembly takes up to 2 minutes. Moving a short distance is possible without prior disassembly.

Cycling I is geared towards all weather from spring to autumn. The minimum dimensions when folded make it easy to move the tent on foot, by bike, car, boat, public transport. Impregnation with polyurethane and silicone guarantees good water-repellent properties of the awning (3000 mm H. St.) and the bottom (3000 mm H. St.). With proper assembly, even in the rainy season, the rest will be comfortable.

The height of the tent allows you to take a sitting position. There is only one entrance and it is enough. The sleeping block is a polyester mesh made using RipStop technology, which is more durable due to the unique weave of threads of different thicknesses. The material is resistant to deformation and reliably protects against insects. The interior space is well optimized. There are pockets for essentials (flashlight, smartphone, water), a roomy vestibule for equipment.