Wireless charging power for Android is 15W and for iPhone is 7.5W. Anderson port for solar panels only
Wireless charging power for Android is 15W and for iPhone is 7.5W. Anderson port for solar panels only
A portable power station that can work with connections with a total power of up to 1200 watts. In the start mode of the power units of the tool and household appliances, the model withstands short-term loads up to 2400 W (for 1 sec.). At the heart of the device is a lithium-ion battery with a capacity of 1080 Wh. The 2E 2E-OPS-1200 is equipped with two 230V pure sine wave AC outlets, four full-size USB ports (two of them support 18W fast charging), two USB type C connectors with Power Delivery (100 W), 12 V / 10 A auto socket, trio of 12 V DC outputs, Anderson port power connector.
In parallel with autonomous power supply of equipment, the model can be used in the role of "uninterruptible" with the time of switching consumers to power supply from the built-in battery in 10 ms. Charging the battery of the device is possible from a household electrical outlet or from solar panels (purchased separately). A large informative screen is built into the front panel of the power station, an LED backlight is placed at the very top of the front side of the case, and a zone for wireless charging of gadgets with a power of 15 W is mounted in the upper platform of the device case. Handles for easy portability of the portable charging station are placed on the sides of the 11.6 kg case.
The information in the model description is for reference purposes. Always clarify the specifications and configuration of the product with the online store manager before purchasing. Catalog 2E 2025 - new arrivals, bestsellers, and the most relevant models 2E.
Компактна портативна електростанція стане чудовим рішенням за умов відсутності загальної мережі електроенергії. Пристрій, по... moreсуті, є великою батареєю в захисній коробці з вбудованими розетками змінного струму та іншими портами. Попри порівняно відчутну вагу (11,6 кг), ця модель має ергономічну форму й доволі компактні габарити. 2E-OPS-1200 оснащено ємним (300 000 мА·год) літієвим акумулятором, заявлена потужність – 1 200 Вт, а частота – 50 Гц. Електростанція надає додаткові можливості, як-то бездротове заряджання чи LED-освітлення.
I recommend before buying, as the full function of the DBZH is not needed
11 August 2023
Winter is coming, and most people are choosing a charging station. I've been using it for 2 days and will write about the main points. I have a model made in 12.2022. There are two modifications of the station, one has a 300Ah@3.6v battery and the other 50Ah@21.6v without the UPS function; I have the latter. The fans are not very noisy. They don't operate during charging, and they turn on briefly (for 1-2 minutes every 25 minutes) at an average load of 100w per outlet. According to the instructions, they will always operate with a load of more than 150w. The instructions I have differ from those on the official website - the UPS page is missing. During simultaneous charging and using the station through the outlet, the charge may either drop significantly (to 15w) or turn off completely. Keep in mind when purchasing that the UPS function may not be available. The only way to create a UPS analog is to charge the station to 100% while not in use. Then connect devices to it; when the power goes out, the devices don't turn off. When the power is restored, disconnect everything from the station and leave it to charge (only in this way can it draw 168w or 268w from the outlet). Charging the station for me with PD 65w + the supplied 168w charger from 0% to 90% took 4 hours. After around 85% charge, PD shuts off, and charging continues only with the supplied charger. I measured the efficiency roughly; at an average load of 90w, it comes out to about 85-90%.
Quiet operation, quiet coolers, good assembly, many ports, "fast" PD + DC charging up to 268 watts (from 0 to 90 in less than 4 hours), good efficiency 85-90%
Volodymyr Bolshakov: use 2E 2E-OPS-1200 less than month
I've been using it for 2 days and will write about the main points. I have a model made in 12.2022. There are two modifications of the station, one has a 300Ah@3.6v battery and the other 50Ah@21.6v without the UPS function; I have the latter.
The fans are not very noisy. They don't operate during charging, and they turn on briefly (for 1-2 minutes every 25 minutes) at an average load of 100w per outlet. According to the instructions, they will always operate with a load of more than 150w.
The instructions I have differ from those on the official website - the UPS page is missing. During simultaneous charging and using the station through the outlet, the charge may either drop significantly (to 15w) or turn off completely. Keep in mind when purchasing that the UPS function may not be available.
The only way to create a UPS analog is to charge the station to 100% while not in use. Then connect devices to it; when the power goes out, the devices don't turn off. When the power is restored, disconnect everything from the station and leave it to charge (only in this way can it draw 168w or 268w from the outlet).
Charging the station for me with PD 65w + the supplied 168w charger from 0% to 90% took 4 hours. After around 85% charge, PD shuts off, and charging continues only with the supplied charger.
I measured the efficiency roughly; at an average load of 90w, it comes out to about 85-90%.