Deepcool Matrexx 50 black (DP-ATX-MATREXX50)
 | Expecting restock 2 489 ₴ Roomy, stylish and well-ventilated case, positioned by the manufacturer in the lower part of the middle price range. The model was created in the Midi Tower form factor, while even a large and powerful E-ATX motherboard can be installed on the chassis. However, more traditional sizes are also supported: ATX, Mini-ITX and microATX. In total, the case is designed to build an advanced gaming PC or a serious workstation. This is hinted at by the possibility of installing a processor cooling tower with a height of up to 168 mm. As discrete graphics, you can install an adapter up to 370 mm long, but if you put the graphics card vertically (and this possibility is also provided), then the maximum length will be 340 mm. Deepcool Matrexx 50 case get a strict premium class design. The front panel an...d one of the sidewalls are made of a single sheet of high-strength tempered glass, the thickness of the glass surfaces is 4 mm. The panel received side ventilation ducts covered with dust protection. Additionally, ventilation is provided on the top cover and bottom, all ventilation ducts are covered with a filter. The platform weighs 7.4 kg, while the body rests on high rubberized legs. The package includes one 120 mm fan, but in total, 6 impellers can be used in the case (the rest the user will have to buy on their own). A place is provided for the power supply unit in the lower compartment isolated from the main part of the platform. |
 |
Roomy, stylish and well-ventilated case, positioned by the manufacturer in the lower part of the middle price range. The model was created in the Midi Tower form factor, while even a large and powerful E-ATX motherboard can be installed on the chassis. However, more traditional sizes are also supported: ATX, Mini-ITX and microATX. In total, the case is designed to build an advanced gaming PC or a serious workstation.
This is hinted at by the possibility of installing a processor cooling tower with a height of up to 168 mm. As discrete graphics, you can install an adapter up to 370 mm long, but if you put the graphics card vertically (and this possibility is also provided), then the maximum length will be 340 mm. Deepcool Matrexx 50 case get a strict premium class design. The front panel and one of the sidewalls are made of a single sheet of high-strength tempered glass, the thickness of the glass surfaces is 4 mm.
The panel received side ventilation ducts covered with dust protection. Additionally, ventilation is provided on the top cover and bottom, all ventilation ducts are covered with a filter. The platform weighs 7.4 kg, while the body rests on high rubberized legs. The package includes one 120 mm fan, but in total, 6 impellers can be used in the case (the rest the user will have to buy on their own). A place is provided for the power supply unit in the lower compartment isolated from the main part of the platform.
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Deepcool 2025 - new arrivals, bestsellers, and the most relevant models Deepcool.
Good airflow, the kit includes 3 fans for intake from DEEPCOOL (also with RGB lighting, retail price up to 2800 for a set of 3 pcs). If you buy without fans, the case itself turns out to be much more expensive. Tempered glass on the front and back. Magnetic dust filters, not clip-on, and there are 2 of them: on top of the case and below under the PSU. I liked everything, there are no critical remarks. Strange behavior of USB 3.0 on the front top panel, 2.0 works fine. No reset button, it was repurposed for the LED switch button. use Deepcool Matrexx 50 few months |
For hot components, I do not recommend the type of video card is not a year old; the purge is bad even at maximum cooler speeds Beauty glass The cooling is disgusting with hot components in the case, everything is simply choked with 6 fans from the front, the turntables do not pick up air well, they are almost close to the glass, which is bad for cooling, better mesh use Deepcool Matrexx 50 few months |
airflow 4 there is enough internal space [censored] there is a place to hide hard drives, there is also enough beautiful design. the 360 won't fit on the top wall and the 420 won't fit on the front if you remove the front panel the temperature drops by 5 degrees. There is no dust mesh on the front panel so you can remove the front panel. |
