Deepcool Matrexx 55 Mesh ADD-RGB 4F black (DP-ATX-MATREXX55-MESH-AR-4F)
 |
 |
The Matrexx series of cases from Deepcool are quite advanced gaming platforms that are distinguished by a convenient design and stylish design. A key feature of this model is the presence of a powerful cooling system. The case has four pre-installed coolers (three on the front and one on the back). To optimize airflow, a metal mesh is used as a front panel. The front has a good filtration system.
To add variety to the design, the platform received an interesting ARGB backlight. The choice of colour design can be done either with a button that is placed on the control panel, or through software, through the motherboard. Deepcool Matrexx 55 MESH ADD-RGB 4F computer case shows improved capacity. With a typical Midi Tower chassis size, the motherboard tray can fit an E-ATX motherboard, as well as ATX, Micro-ATX and Mini-ITX. This model is equipped with a viewing sidewall made of a solid panel based on tempered glass, while the glass thickness is a solid 4 mm. For the power supply, a place is allocated at the very bottom, behind a decorative casing. The cable management system will allow you to covertly connect all the wires.
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Deepcool 2025 - new arrivals, bestsellers, and the most relevant models Deepcool.
Buy Deepcool Matrexx 55 Mesh ADD-RGB 4F black
Корпус DeepCool MATREXX 55 MESH ADD-RGB 4F RGB Чорний | 3 830 ₴ |  | |||
Корпус Deepcool Matrexx 55 Mesh ADD-RGB 4F RGB Black (MATREXX55-MESH-ARGB-4F) | 3 763 ₴ |  | |||
| 5 024 ₴ |  | ||||
Overall, a good budget ventilated case. Designed more for high-end hardware configurations, as it is really 'cool'. Externally, it is without frills. Instead of a Reset button, there's a button to switch and turn off fan lighting. A lot of space for cables behind the back panel. Many holes for routing cables to the board. Really cool. Not a very convenient power supply installation. Although many cases are like that. Only two pockets for HDD. There are of course many holes for mounting SSDs on the back panel, but there are no pockets for them included. The documentation can be said to be 'nonexistent.' A rather unclear sheet. use Deepcool Matrexx 55 Mesh ADD-RGB 4F few months |
Top case PSU at the bottom with many coolers The cooler for the beast is not enough, but for the deacons it will be good for me  valera: use Deepcool Matrexx 55 Mesh ADD-RGB 4F more than year |
