Gamemax Fortress TG black
 |
 |
This is a low-cost case with good capacity and stylish design. The platform size corresponds to the Midi Tower form factor. The well-organized chassis easily accommodates an ATX motherboard, but microATX/Mini-ITX can also be installed. The viewing sidewall is a heavy-duty glass that opens up a stunning view of the assembly. The Gamemax Fortress TG case is supplemented with efficient cooling.
As part of this model, there are three regular fans with a diameter of 120 mm. The top cover has a large ventilation duct covered with a dust filter. To increase the efficiency of air blowing, there is a ventilation channel in the lower part of the case. Like the top, the bottom vent has a filter. The list of I/O interfaces includes: three USB connectors (a pair of version 2.0 and one 3.0), mini-Jack sockets.
In order to prevent a shortage of memory in the computer system, the platform received two connectors for a 3.5″ HDD and the same number for a 2.5″ SSD. The chassis features a modern 2-section device. The upper part is dedicated to the motherboard with the main hardware. Below is the space for the power supply. The case will provide an opportunity to assemble a performant gaming system. 170 mm is allocated for the installation of the central processor. You can build a graphics subsystem using boards up to 330 mm long.
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Gamemax 2025 - new arrivals, bestsellers, and the most relevant models Gamemax.
Buy Gamemax Fortress TG black
All prices 45 →| 1 899 ₴ |  | ||||
| 1 879 ₴ |  | ||||
Корпус GameMax Fortress TG Black без БЖ | 1 879 ₴ |  | |||
| 1 879 ₴ |  | ||||
| 1 879 ₴ |  | ||||
Visually attractive case, the material and frame are naturally thin, and the tempered glass is also thin. But when assembled, it looks very nice. I installed the Deepcool Gammaxx GT and there's plenty of room for an even larger cooler. There's a lot of space for installing anything. The tray is removed from the bottom, with thumb screws. The glass is held with bolts, and the bolts have gaskets so that the glass is not tightened by the bolt itself. These gaskets don't hold after the first reinstallation—I lost them on two bolts, found one but not the other... You might need to DIY a dust filter at the front, as the system gets dusty within a month due to through holes... The package includes three fans with a controller, but the fan speeds cannot be managed from it. By default, they run at 1100-1200 RPM. They're somewhat noisy, but not annoying if the case is under the desk. I don't think it would be suitable for a desktop build... Price 3 coolers Front panel without dust filters Noisy coolers use Gamemax Fortress TG few months |
