Gamemax StarLight black
 |
 |
The case is designed for a performant computer system. 4 fans (3 at the front and 1 at the rear) provide excellent airflow to internal components, preventing overheating and premature component failure. The Gamemax StarLight system unit supports the ability to install motherboards of the following sizes: ATX and micro-ATX. The left side of the case is presented with a transparent acrylic insert, which offers an excellent view of the hardware inside the PC.
The cooling fans are backlit. The top surface houses the keypad and interfaces. The list of connectors includes: USB 3.0 (1 port), USB 2.0 (2 ports) and several mini-Jacks (for audio and microphone). Also, there is a regulator for controlling the rotation speed of the coolers. If necessary, the fans can be replaced with a liquid cooling system. All ventilation units are protected by dust filters. The maximum height of the processor is 170mm. The maximum length of the graphics card is at the level of 360 mm. The case received a rather bright design and, above all, a fan of modding will like it.
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Gamemax 2025 - new arrivals, bestsellers, and the most relevant models Gamemax.
Buy Gamemax StarLight black
All prices 33 →| 2 389 ₴ |  | ||||
| 2 389 ₴ |  | ||||
| 2 389 ₴ |  | ||||
| 2 319 ₴ |  | ||||
Корпус Gamemax Starlight 2 AW (Starlight 2AW) Starlight 2AW | 2 389 ₴ |  | |||
2 2 7 3 |
Anyway, since this case is still being sold, I'll update my previous review. Bought it in 2019. I'll start with dust protection - there is none. The most you can do is attach a magnetic mesh to the back wall with three fans. About the lighting - it's a completely unnecessary thing, as I now understand, just redundant. And you can't turn them off (I, for example, "disabled" these LEDs mechanically :) ). The front part of the computer glows like a projector, and when you need to watch a movie... well, imagine it yourself. The reset button on the unit fell off in the first month, glued on just to make it stick. It's overall noisy and a bit messy. But the biggest "highlight" is the fans. After 2 years of use, when I turned on the computer and walked away from it, I heard an incredibly loud noise like a truck engine. Returning to the computer, I realized it was the fan that, for some reason, stopped spinning at full speed and started making this wild noise. I never understood exactly what the issue was, maybe because the designers screwed up, or maybe it got "clogged," but I solved the noise issue by simply stopping the fan. Also, this problem resolved itself after an hour of operation, but sitting through that hour with such noise isn't something everyone can handle. In any case, a regular user can't easily reach these fans because special screws are needed, and I'm sure only the Chinese assemblers have such screwdrivers that gift us such wonders. zero Noise. Quality. etc.  Andrey Gertov: use Gamemax StarLight Light-B more than year |
Good, well-ventilated case, quiet fans included. I bought it for myself because I liked the price and the inclusion of 4 fans... The presence of pre-installed turntables, a separate casing for the PSU and HDD, the ability to quickly disassemble and remove components, cable management, the ability to install large tower coolers, there is room for larger graphics cards, a lot of space for installing LSS Plastic side and front cover (charged with static and attracts dust and hair, especially if there are animals), the presence of a mount for outdated drives (which you can’t put if you don’t remove the front cover, it’s not needed there at all, I removed it altogether) Venttank: use Gamemax StarLight Light-B less than month |
the body is frankly ha#but the coolers are noisy, I am the pelesos the wiring is frankly not giving in singing that it is not closed, the installation of hot disks (requires the hands of the designer) thin metal for such pennies you can take a much better case without coolers and for retail take normal quiet coolers looking at 6 out of 10 cable management, flimsy case, not easily installed hard disks, price, noise, plastic door on the yak Dіma: use Gamemax StarLight Light-B more than year |
Starship Milano
The StarLight case from Gamemax is designed to attract attention. Its front transparent wall opens up a view of 3 massive illuminated coolers, which, when turned on, resemble either a starship engine or the eyes of a hypnotoad from the Futurama animated series. If you are looking for a catchy flashy design, then finding something more provocative for the money will be extremely difficult.
When to Get Attention
StarLight is made of 0.5 mm metal, standard for this class. One of the walls is glass, which opens up a view of the inside of the PC. On the front part, a place of honor was taken by large and quiet backlit fans, which set the tone for the entire appearance of the case. The backlight, though not RGB, but looks impressive. It's only inconvenient that it doesn't turn off. On the top cover there is a navigation panel, which, in addition to the standard power buttons, USB ports and headphone outputs, is equipped with a cooler rotation speed control. Most of the top panel is occupied by a large grill with a dust filter to remove excess heat from the case.
Layout of elements
The case belongs to the universal Midi Tower form factor, which allows the installation of ATX, Micro-ATX and mini-ITX motherboards. Inside, all ventilation units are protected by dust filters. The maximum height of the processor is 170mm. The maximum length of the graphics card is at the level of 360 mm. That is, virtually any popular model will fit. There are 4 standard drive bays and the ability to install water cooling. The power supply is installed from below. In general, the internal structure is quite ordinary, but well thought out, assembling a computer here is as easy as shelling pears. A slight inconvenience is caused only by the proximity of the power supply compartment and one of the HDD pockets. First you need to fasten the hard drive, and only then put the power supply, otherwise you won’t get close to the first one.
