Husqvarna 435 15
![]() |
Husqvarna 435 15 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Husqvarna 2025 - new arrivals, bestsellers, and the most relevant models Husqvarna.
Buy Husqvarna 435 15
Бензопила Husqvarna 435 II | 11 999 ₴ | ![]() | |||
Бензопила Husqvarna 435 II 9705597-35 | 11 999 ₴ | ![]() | |||
Бензопила Husqvarna 435 II (цепь H30) 9705597-35 | 11 999 ₴ | ![]() | |||
Бензопила Husqvarna 435 II (9705597-35) | 11 999 ₴ | ![]() | |||
Аккумуляторная цепная пила Husqvarna 435i, без акб и з/у 9707180-14 | 14 999 ₴ | ![]() |
2 0 2 11 |
For two years, it has been used to cut a lot of wood of varying hardness during firewood preparation. Frequently transported in the trunk during trips to hard-to-reach natural locations. Works like a Swiss watch. Comfortable, powerful, well-crafted. The chain holds its sharpness well. Sometimes chain lubricant oil leaks a little, so keep that in mind during transport to avoid getting anything stained. ![]() |
decide for yourself I got a good copy the ideal saw is better than the best I didn’t work for the garden and to prepare firewood for the job, then according to the instructions you need to pour 92, but if you delve into the quality of our fuel, the smallest octane is 95 after working for about an hour at medium speeds the variator gets weak and gets hot the chain quickly weakens ![]() |
in general, I’m very pleased with the saw, I built a sauna, I’ve owned it for 3 years comfortable, reliable and practical doesn't start the first time ![]() |
Light saw
A chainsaw of Swedish origin is very convenient for long-term sawing of logs of small and medium diameters (for example, when harvesting firewood for the winter), as it weighs only 4.2 kg (without cutting equipment). The length of the tyre included in the kit is 380 mm, which allows it to fell trees up to 700 mm in diameter. If desired, a 350 mm long bar can be supplied if there is a need to reduce weight or reduce dimensions for working in cramped circumstances.
Air pre-treatment
The manufacturer has introduced Air Injection technology. This is a centrifugal air pre-cleaning system that increases the intervals between cleaning the filter element, thereby increasing its service life. By the way, you can clean the filter in a matter of minutes thanks to the quick-release mount. In addition, the engine is made using X-Torq technology, which, according to the manufacturer, provides reduced fuel consumption and produces less exhaust gases (much depends on the quality of gasoline).
100% service
The fuel tank with a capacity of 370 mL is equipped with a transparent indicator, thanks to which the level of the gasoline-oil mixture is always visible. A full tank is enough for 30 minutes of work. An oil pump is responsible for lubricating the chain, which supplies the mixture automatically. Some users note that the oil tank leaks during storage of the saw, so you should always drain the oil after work. A pleasant moment is the availability of maintenance services even in regional centers, which means there will be no problems with repairs or finding spare parts. True, the buyer will have to immediately lay out a rather large amount, but the saw will quickly work out the invested funds.