Welding Helmets Vitals series Master (semi-pro)
Show
by ratinglowest to highest pricehighest to lowest priceby reviewsby date of additionHelmet weight (g)Light filtering levels (DIN)Min. degree of darkening (DIN)Max. degree of darkening (DIN)Protection from UV/IR (DIN)Turn-on time (ms)Filter viewing area (width) (mm)Filter viewing area (height) (mm)Optical sensors
Other Products Series Master (semi-pro)
semi-automatic inverter, synergistic, welding: MMA, MIG/MAG, TIG, welding current: from 30 A, up to 180 A, электрод до 4 mm, wire: from 0.8 mm, up to 1 mm, power supply: 230 В, from 160 В, display
drill driver, gun, 700 W, 400/1500 rpm, cartridge: keyless, Ø 10 mm, reverse, power supply: battery, 18 H, case
brushless, 2500 W, 195 bar, nozzles: fan-shaped, foam gun, water suction, detergent tank, reel (drum), weight 21.1 kg
chainsaw, electric saw, 2400 W, bar/blade 400 mm, chain pitch 3/8 ", motor protection, keyless tension, weight 5.3 kg
random orbital, 300 W, saw blade 125 mm, 2000 – 6000 rpm, frequency 4000 – 12000 opm, amplitude 3 mm, speed controller, additional handle, dust collector
electric (230 V), at the entrance 380 L/min, at the exit 230 L/min, 8 bar, 2.2 kW, receiver: 55 L, direct drive
800 W, from 800 stroke/min, up to 3000 stroke/min, stroke: 23 mm, pendulum action, dust blower, LED light, laser marker, weight: 2.5 kg
3000 rpm, 63 cm³, drive unit mechanical, 2.2 kW, 3 hp, 2 operators, boer: diameter 40 cm
paint sprayer, corded, 500 W, consumption 0.85 L/min, nozzle 2.6 mm, storage tank: 700 mL, remote compressor
hammer drilling, 4500 bpm, without a hit, 900 rpm, 0.9 J, power battery, 18 В, not included, LED light, weight 1.5 kg
maximum 3.8 kW, 230 B, petrol, 4-stroke, tank 16 L, sockets 2, output 12V, electric starter, hour metre, 595х445х505 mm, 43.6 kg
stationary, planing: width 110 mm, depth 3 mm, 1200 W, double-sided knives, stationary, dual dust out system
12 kN, frequency 680 VPM, petrol, 4.7 kW, seal: 450 mm, sole: length 345 mm, width 285 mm
semi-automatic inverter, synergistic, welding: MMA, MIG/MAG, TIG, welding current: from 20 A, up to 140 A, электрод до 4 mm, wire: from 0.8 mm, up to 1 mm, power supply: 230 В, from 160 В
impact wrench, gun, 1050 W, 2200 rpm, 1 speed, cartridge: square drive, 1/2 ", impact mode, reverse, power supply: mains (230 V), case