Five Bosch household appliances for the DIYer

The device is a screwdriver with a drill function. It is able to easily screw 200 mm self-tapping screws into a wooden beam and drill 10 mm steel. To work with materials of different densities, the model provides adjustment of the rotation speed in two positions. The first from 0 to 400 rpm is designed for screwing screws and self—tapping screws into drywall or soft putty, and the second from 400 to 1300 rpm — for wood and metal. Drilling (without impact) is carried out at the same speed. Additionally, the twisting force can be changed using a 25-position torque clutch. here we have painted the revolutions regarding the operation of the screwdriver, and what about the drill mode?

The screwdriver is powered by a 1.5 Ah Li-Ion battery, which lasts for several hours of use. It reaches a full charge in just 55 minutes, which can be seen by the flashing indicator. Bosch developers have eliminated the problem of self–discharge — even after several months without work, the battery retains 95% of its capacity. It is much lighter than its nickel-cadmium counterpart, so the screwdriver weighs only 1.4 kg (together with the battery). A pleasant moment is the presence of a spare battery in the kit, as well as a case for transporting the tool.

The quick-release chuck allows you to change the drill bit or bit in seconds. There are two holes on the back of the battery for storing bits. However, some users note that the hole holds the bat weakly, which is why it constantly falls out. The drill handle is rubberized, so it does not slip out of your hands. Unfortunately, there is no backlight in the Bosch GSR 1800-Li, which creates difficulties when working in hard-to-reach dark places of the room. The reverse button is also a "start" blocker — it is enough to put it in the "middle" position. The screwdriver reducer is equipped with overload protection.

The inexpensive Bosch GST 8000 E model is capable of making cuts in wood up to 80 mm and 20 mm in non-ferrous metal. For sawing dense wood species, the function of a pendulum stroke with three positions is provided. The patented quick–release system of the jigsaw will allow you to change the blade with one hand — it is enough to turn the clamping sleeve and the blade will fall out.

The stroke of the blade of the electric jigsaw is carried out in the range from 500 to 3100 stroke / min. In this case, the speed adjustment is performed both by strong / weak pressing of the button and by the wheel located on the "start" key. Locking the start button allows you to work with the tool without constantly pressing the key. Moreover, there is a lock on both sides of the case, which is convenient for both right-handed and left-handed people. The case is made of high-quality plastic, but the handle is not rubberized, which is why it can slide in the hand.

The cast steel sole ensures a stable position and smooth running of the canvas on the material. For sawing at an angle, it can be tilted at 45 degrees. However, it is worth noting that this operation is not performed quickly, since you need to unscrew the bottom screw with a key. The key itself is conveniently stored in the holder on the power cord. The sawdust blowing function provides a good overview of the saw line during operation.

Where an electric jigsaw can not cope or you need to cut a lot of cubic metres of wood, the Bosch GKS 600 circular enters the "battle". Thanks to a 1200 watt motor, it is capable of sawing wood with high density (such as ash and beech) and up to 55 mm thick. However, the depth of the cut can be classified as "small", since analogues of other brands and even cheaper saws can have a depth of up to 66 mm. It is also possible to make an inclined cut at an angle of 45 degrees thanks to the rotating system of the sole (a 37-mm beam saws at 45 degrees). The sole position is changed in less than 10 seconds thanks to the screw clip in the front of the circular (in other models, you need to unscrew the mounting bolt with a key).

Free access to the carbon brushes on the housing ensures their quick replacement without the need to contact a service centre. The saw blade changes in two steps – it is enough to "discard" the protective casing with a lever, and unscrew the cutting blade with a hexagon.

The "start" button lock will prevent spontaneous or accidental switching on of the device, and during operation will eliminate the need to constantly keep the button pressed. The housing of the circular is equipped with a hole for attaching a vacuum cleaner or a dust bag to remove chips. The disadvantage of the model is the lack of a "soft start" function, which is why a small jerk occurs during the start of the saw.

The main feature of the German heat gun is the presence of an LCD display that displays the current operating temperature set by the user. The temperature can be adjusted in the range from 50 to 630 degrees in increments of 10 degrees. This function will allow you to select the desired value depending on the material being processed. The hair dryer is powered by a 2000 Watt motor.

The Bosch PHG 630 DCE model has three blowing positions. The first (150 L/min) is designed to cool the material at a temperature of 50 degrees. The second and third (300 and 500 L / min) allow you to increase the intensity of blowing, while the temperature can be set independently from 50 to 630 degrees. The built-in overheat protection turns off the heating element and leaves the fan in the working position until the hair dryer cools down. This functional feature allows you to extend the service life of the tool.

The handle of the hair dryer is rubberized, so it does not slip in the hand during operation. The heating element is closed from the user by a special plastic coupling that prevents burns. If necessary, it can be disconnected. Moreover, you can work with the tool for quite a long time without fatigue in your hands, since it weighs only 900 grams. The rear flat part of the case allows you to use the hair dryer permanently in a vertical position (convenient for heating various adhesive surfaces). But there is no case for transportation, so you will have to buy it separately.

Thanks to the precisely calibrated sole of the Bosch PHO 2000 electric cutters, it perfectly planks even "knotty" wood and "humpback". The planing depth (from 0 to 2 mm) can be smoothly adjusted (0.5 mm pitch) using a screw switch, which also acts as a driving handle. At the same time, the groove can be selected up to 8 mm, which is especially convenient for the stud connection of parts.

The sole of the model is equipped with three V-shaped grooves of different widths, so the edge of the workpiece can be perfectly adjusted to the required size. According to the manufacturer, the patented Woodrazer knife system ensures perfect chip removal from the board without the need for subsequent processing of the workpiece. is it known how it is in fact? it would be good to confirm or deny. The knives themselves have a double-sided sharpening, so when one side is blunted, it can be turned over and continue working. The parking shoe ensures a stable position of the plane without the knives coming into contact with the workpiece.

The appliance is equipped with a small sliding box for storing hexagons and spare knives, so that the necessary components are always at hand. Also on the right side of the housing there is a small hole for storing one hex key, which is needed to change knives on the shaft. The plane is equipped with a two-way dust removal system (convenient for right-handed and left-handed people). It is enough to attach a vacuum cleaner or a bag on one side, and close the valve on the other. The rubberized handle will not let the tool slip out of your hands. The power cord is reinforced at the base, so it does not bend during operation.