TOP-5 powerful two-wheel tractors and cultivators for arable land

Inexpensive gasoline cultivator Iron Angel GT06 will be a good help in the processing of large areas for growing crops, as well as loosening and eliminating weeds. With a relatively light weight of 57 kg, the unit is easy to manoeuvre around the site, and its movement to the job site will be simplified due to the presence of a convenient handle and transport wheels. The cultivator is simple and easy to use, it can be adjusted to your height thanks to the height-adjustable handles, which can also be turned at an angle if desired.

The machine is equipped with a single-cylinder 4-stroke air-cooled gasoline engine E212 with a capacity of 7.5 hp. (5500 W), which has an overhead gas distribution mechanism (OHV). The fuel tank with a capacity of 3.6 liters, which is filled with AI 92-95 gasoline, is enough for a long time without refueling. To fill the crankcase, use SAE 10W30 engine oil in an amount of 0.6 liters. The engine is manually started and the cast iron gearbox with chain drive allows for 2 forward speeds and reverse reverse.

The model is completed with a set of soil cutters, consisting of 6 cutters with 4 knife plates each, and 2 fencing disk caps. This canopy allows you to grab the soil at a width of up to 90 cm with a working depth of 30 cm. At the same time, a powerful motor with good torque and the mass of the power unit ensures effective loosening of the soil without additional effort. The trademark of agricultural machinery is registered in the Netherlands, but in fact the brand's products are produced in China. Despite this, the cultivator turned out to be quite balanced and has an excellent price / quality ratio, with which it has no real rivals in this category of low-cost machines.

The rotary motor cultivator Oleo-Mac MH 175 RK from the Italian manufacturer of garden equipment is a light model (60 kg) with a gasoline engine, which is designed to break clods and loosen the soil. This agile mid-capacity farm machine is great for home use, delivering high performance tillage even for inexperienced users. The cultivator is powered by a single-cylinder air-cooled motor Emak K 800 H OHV with a power of 4.4 kW (volume 182 cm3), which spins the output shaft in the speed range of 1400 - 3600 rpm. The engine is designed to work with gasoline having an octane rating of 89. The fuel tank capacity is 3 liters, and the volume of the crankcase for oil filling is 0.6 liters. The motor is started manually with a starter cable, and the torque is transmitted using a chain gearbox with gears.

As the main attachment, a set of 6 reciprocating cutters with 4 knives, which are 3 pcs. are symmetrically mounted on the working shaft, and 2 safety discs can be additionally fixed on the end flanges. The motor hoe does not have outstanding characteristics of cutting the soil: the maximum width of the working front is 82 cm, but the maximum depth of tillage is only 16 cm. adjust both horizontally and vertically. The 1 forward and 1 reverse gear selector levers are located on the handle for quick change of travel direction. The machine cheerfully runs forward at a speed of 8.4 km/h, providing high-quality loosening of the soil, and backs up at a speed of 3.5 km/h. I must say that despite the built-in silencer, the motor is quite noisy (83 dB), so for long-term work with the unit, it will not be out of place to stock up on protective headphones.

The Forte 80-G3 motorized cultivator from a solid Chinese manufacturer of home gardening equipment is a good option to replace heavy manual labor. The car is intended for productive processing of soil of gardens and kitchen gardens up to 50 acres. The two-wheel tractor is equipped with a 4-stroke, 7-horsepower gasoline engine, which is started by a manual starter with an air damper. The oil bath filter effectively cleans the incoming cooling air from dust, increasing engine life. The fuel tank holds 3.5 liters of AI-92 gasoline, and 0.6 liters of 15W40 mineral oil or 10W40 semi-synthetics are poured into the crankcase. The declared noise level is 78 dB, which is quite good for motors in this class.

The transmission is implemented with a cast-iron gearbox with a chain drive, a 3-strand pulley with 2 V-belts and a power take-off shaft for a belt drive. The gearbox (gearbox) has 4 speeds: 3 back, which allows you to quickly select the pace of movement. A bonus to karma adds the ability to adjust the steering handle in height and in a horizontal plane without the use of special keys. We also note the emergency engine shutdown button, mounted directly on the steering wheel handle. Two 8-inch pneumatic wheels, replaced by 2 rotary cutters with 3 knife sections on the left and right, also allow you to work with a trailed cart and other additional tillage attachments. The maximum working width of a strip of arable land is 80 cm, and the maximum cutting depth is 30 cm. The front linkage pipe with holes can be used as an additional carrying handle, as well as for attaching additional weights that increase the load on the soil for more efficient loosening.

The practical and reliable gasoline cultivator Konner&Sohnen KS 7HP-950A is designed for cultivating soil with different properties: sandy, clay, peat, calcareous. The model belongs to the middle price segment and has good characteristics and a wealth of opportunities. So, in terms of width and depth of 108x31 cm arable land, the unit surpasses many devices in this class. The machine is good not only in loosening, but also does an excellent job of planting and harvesting, cutting weeds, hilling and deep plowing. To fully use the full potential of the cultivator, it's easy - you just need to buy and install additional attachments. The cultivator received a powerful air-cooled KS 240 engine with 7 hp. with a volume of 212 cm3, as well as a gearbox with a chain and belt drive, providing 2 forward speeds and 1 reverse speed. For starter start of the motor, simplified mechanics with an exhaust cable are used. Unfortunately, the control handles can only be adjusted in height. In the same place, the clutch lever and ignition switch (left), as well as the gear lever (right) are mounted on the handles.

For cultivation, a set of saber cutters with 32 knives (2 groups of cutters on each side) made of durable forged steel are used, which cope equally well with well-groomed and virgin soils. To protect the milling cutters from damage and stable running in a track, metal protective discs are installed in the end part of the shaft, which are included in the delivery. From above, the cutters are covered with a special safety shield, which further reduces the release of stony soil particles. A transport wheel with a convenient handle for moving is fixed on the front of the remote bracket, and at the back there is an opener (stop-limiter) that allows you to adjust the depth of loosening, and also acts as a parking leg. It should be noted that the model is not equipped with a pair of rubber wheels, but they can be ordered additionally.

Husqvarna brand products enjoy a good reputation not only in Sweden, but also far beyond its borders. This brand is represented by a wide range of different equipment for working in the garden, in the garden, in the garden and in forestry. The practical Husqvarna TF338 power cultivator is equipped with a single-cylinder 4-stroke gasoline engine of its own design WM170FB / P-2 with a volume of 212 cm3 and a rated power of 4.9 hp. (3600 W). The motor is started by a manual starter with preliminary enrichment of the combustible mixture. A simple algorithm for sequential actions for starting in the form of hint drawings is applied directly to the engine. With the usual crankcase volume of 0.6 liters, the engine received a large fuel tank containing 4.8 liters of unleaded gasoline, which makes it much less likely to think about refueling. An oil bath air filter is used to protect the motor from the dust that is inevitable when operating a cultivator, which requires regular cleaning. Chain mechanical transmission provides movement of the machine forward at 2 speeds and the possibility of reverse reverse (1st gear).

The control handles have a folding design and are equipped with a height adjustment mechanism, which allows you to adjust the walk-behind tractor to the height of the operator. On the left handle is the clutch lever, and on the right - the fuel control lever and the engine on / off buttons. Behind is the hitch mechanism, in which the coulter is installed by default. An interesting feature of the device is the presence of a protective engine bumper that protects it from damage during transportation. For ease of movement, 2 wheels with rubber tires are attached to the walk-behind tractor, which are replaced by attachments at the place of work. The motor cultivator is equipped with stacked milling cutters, which are installed in 4 pieces. on each side, providing a solid maximum width of 95 cm. separately.