A-Data XPG VALOR AIR black
 |
 |
Relatively inexpensive case with a good air cooling system. This is a Midi Tower platform that is perfect for housing an ATX motherboard. The front has a Streamline-Carving panel with decorative perforations in the form of an ornament. The front cover is secured using an easily removable magnetic clasp. A fine-mesh anti-dust mesh is installed behind the façade. There are additional mesh filters on the top cover and bottom.
The A-Data XPG VALOR AIR computer case guarantees high airflow efficiency. The cooling system is organized using four standard fans. All factory turntables have a diameter of 120 mm. The top cover is well compatible with the 240mm liquid cooling radiator. The delivery set includes a basket for mounting two 3.5″ HDD memory drives. Additionally, there are two brackets for fixing 2.5″ SSD solid-state drives. The system unit can be equipped with a powerful processor - it is permissible to use a 166 mm tower for heat transfer of the CPU. The chassis supports video cards up to 305 mm in length. High-quality 3 mm tempered glass is used as the main side panel. Two USB 3.0 ports are available simultaneously for information input/output.
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog A-Data 2025 - new arrivals, bestsellers, and the most relevant models A-Data.
Buy A-Data XPG VALOR AIR black
Корпус Adata XPG Valor Air Black (VALORAIRMT-BKCWW) | 3 912 ₴ |  | |||
| 2 591 ₴ |  | ||||
| 3 915 ₴ |  | ||||
| 3 918 ₴ |  | ||||
The case is a C-grade. The side cover lacks rigidity ribs and therefore bends. The main problems arise during assembly. Poor quality stands, screws, and likely the holes for them. To screw the stands in, I had to go through 3 circles of hell. The mounting for the video card on the case and the mounting on the video card itself don't align. There's a difference of a few mm. Some thumb screws were tightened so much that the metal bent a bit, and I had to use pliers to unscrew them. The dust filter is quite good and I'm sure it does its job perfectly, but it causes a slight hum from the fans. The fans themselves are quite noisy, and this is probably the main drawback of this case for me. If noise doesn't bother you, the fans here are genuinely good quality. The temperature on the video card dropped by 7 degrees compared to the old case, and in some games, the fans on the video card work very quietly, whereas earlier they would start almost immediately upon starting the game. Even if you simply hold your hand up to the case, it's like opening a fridge, even at 27-30 degrees in the room. So it depends on personal preference. I spent a long time choosing between different cases priced at 3k-5k and then the price of the Air dropped to 2300 UAH, so I decided to buy it. For this money, until today, I considered it the best option. But a few days ago, XPG released the VALOR MESH for 1800 UAH (it is identical to the Air, except for the front panel design) and the XPG VALOR MESH C - with a USB-C on the front panel, similar quality, but with ARGB 4-pin fans and a round power button (which looks better) and all for 3k. Design, metal front panel, 4 fans included, plenty of space for cabling, thick fans (43-45 dB per 1 meter in the case) and rotten open, complete mounting brackets for the motherboard.  Oleksandr: use A-Data XPG VALOR AIR Black less than month |
A-Data XPG VALOR AIR configurations
| Price for A-Data XPG VALOR AIR | ||||
|---|---|---|---|---|
| A-Data XPG VALOR AIR black | from 2 591 ₴ | 4 offers | |
 | A-Data XPG VALOR AIR white | from 2 591 ₴ | 4 offers | |
The Conservatives' Choice
ADATA XPG Valor Air is a tall case for ATX motherboards, but relatively compact in length, for video cards up to 30.5 cm. However, this is quite enough if not for flagship, then certainly for pre-flagship GPUs. It will appeal primarily to conservatives who consider backlighting to be excessive. Four complete fans do not light up, which is now a rarity among gaming cases.
Magnetic mount
The front panel is not made of plastic, like most competitors, but of steel and decorated with a stylish Streamline-Carving pattern. It is easy to remove, because it is attached with magnets instead of latches. The dust filter that follows it has a similar magnetic mount. All this simplifies the initial assembly and subsequent maintenance of the computer.
Tinted glass
The power supply is covered with an external casing, so the tinted glass covers only three-quarters of the side wall of the case. The maximum permissible length of the power supply is 18 cm, but if you dismantle the basket for a single HDD, you can install even a large kilowatt. And there is also a paired Mini-Jack for modern wired stereo headsets.
