Electrolux EWH 100 Centurio DL H
Outdated Product 7 719 ₴ Type: storage; Energy source: mains; Tank volume (L): 100; Power source: 230 V; Power consumption (W): 2000; Magnesium anode; Heating elements: 1; wet heater; thermostat; overheat protection; dry heating protection; safety valve; Pipe connection: bottom; Dimensions (cm): 49.3x121x29; |
Electrolux EWH 100 Centurio DL H | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Electrolux 2025 - new products, best sales and most actual models Electrolux.
Before buying always check characteristics and configuration of product with online store manager
Catalog Electrolux 2025 - new products, best sales and most actual models Electrolux.
Which is better: wet or dry heating element in a water heater?Learning the design features, pros and cons of "wet" and "dry" heating elements in water heaters
Detailed FAQ on storage water heatersWe answer the most common questions regarding the installation and operation of storage water heaters
3 1 6 5 |
When it comes to plumbing and everything connected with it, I always try to do everything as reliably as possible. I do not like any plumbing problems and I am especially afraid of leaks. This is probably why, when buying a water heater, he did not spare money and bought this expensive model with a stainless steel tank. My logic was this - stainless steel cannot corrode in water, which means that no anodes are needed and maintenance will also be easier. You already understood that I was deceived with the anode, it is still there. It turns out that the stainless steel itself really stands well in hot water, but its welds can corrode. This is primarily due to the fact that steel is used the cheapest and low-grade, something like our X13. And when welding, the seams can really be depleted of chromium and, after that, rust fun. To begin with, it has a proprietary two-year warranty on the electrical part and a seven-year warranty on the tank. Nice numbers to say the least. It has two heating elements and two heating levels. The first gives a power of 1000 watts, the second adds the same amount and the total power is equal to 2 kilowatts. At the first stage, it heats up for a long time, about more than three hours, but at the second stage, after an hour and forty, the water is hot. It has good thermal insulation, that is, heat loss is small. Cool control with convenient switch, thermostat control and digital inductor thermometer. There is a safety shutdown device. In general, if you do not pay attention to the trick with seams and a magnesium anode, then the water heater is chic. High price, stainless steel and still need additional protection in the form of a magnesium anode. And for electronic control, it is recommended to use a stabilizer. But I don’t seem to have any voltage jumps, so it’s fine without it. |
If we talk about it in one sentence, then it will sound like this - "A fast, powerful and capacious enough water heater for a young couple." A volume of 50 liters is enough for two, if you use the shower without fanaticism. ,In principle, I measured several times and made sure that 20-25 liters of warm water is enough for a normal shower. On our water heater, I set the economy mode, that is, the water is heated only up to 55 degrees. So you still need to dilute it, and it takes about 17-18 liters of hot water from the water heater to get 25 liters of warm water. Total for two showers you need about 35 liters. With a capacity of 50 liters, there are still about 5-6 liters of hot water for the kitchen, and then the temperature already begins to drop sharply. Fortunately, the heating element in this model is powerful, two kilowatt and 50 liters of cold water turn into hot, with a temperature of 55 degrees, in less than an hour. The heating control is electronic, the device shows the temperature not with an abstract arrow, as budget models do, but with a full-fledged LED display. In addition to the usual protection against pressure and overheating, there is a protective shutdown device that is triggered when the insulation of the heating element is broken. So this water heater will definitely not beat us with current. The digital thermometer lies up by about 3-5 degrees. He specially took out his trusted mercury thermometer and compared the readings. Fast heating does not work in ECO mode, by default only one heating element is turned on in it and the heating time is increased to two hours. |
2 out of 15 user review(s) shown
10 more user review(s)