Atmor InLine 5kW
 |
 |
Atmor InLine 5kW 3 L/min 5 kW 3 L/min 7 kW | |||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||
Electric instantaneous water heater with a power of 5 kW with reliable mechanical control and compact overall dimensions for horizontal installation. One of the younger models of the Atmor InLine series, designed for connection to a single-phase power supply with a voltage of 220 V. Positioned as a mid-price product aimed at domestic use. Will help organize hot water supply for the kitchen, bathroom, shower.
The main advantage of the Atmor InLine 5kW instantaneous water heater is the very fast heating of water, which distinguishes it from storage boilers, which require at least several tens of minutes to raise the temperature. Can play the role of a backup source of hot water when the centralized hot water supply is turned off. Equipped with a reliable electromechanical control system with indication and built-in overheating protection. Two switches allow the water heater to operate in three different power modes (2/3/5 kW), which allows you to control the outlet water temperature or regulate the flow. Thanks to its compact body, the water heater is suitable for hidden installation. Maximum productivity reaches 3 l/min (with a temperature difference at the inlet and outlet of 25 °C).
Before buying always check characteristics and configuration of product with online store manager
Catalog Atmor 2024 - new products, best sales and most actual models Atmor.
Buy Atmor InLine 5kW
All prices 8 →Atmor Atmor In-Line 5KW | 5 849 ₴ |  | |||
Електричний проточний водонагрівач ATMOR In Line 5 кВт/220В 10820181018 | 5 849 ₴ |  | |||
Проточний водонагрівач Atmor In line 5 кВт | 5 540 ₴ |  | |||
| 5 849 ₴ |  | ||||
| 5 570 ₴ |  | ||||
8 4 10 8 |
I live in my (separate) house and always solved the issue of hot water on my own. The previous storage type water heater failed after working for five years, and since the malfunction concerned the violation of the integrity of the tank due to metal corrosion, there was no point in repairing it. I decided to buy a new boiler with a flow one, because it is not always convenient to wait for hot water from the storage tank. Always getting hot water "on demand" is very convenient, to be sure. You can use the switches to change the power of the heater. There are three options: 3 kW, 4 kW, 7 kW. All this, of course, is great, but a power of 3 or 4 kW is absolutely not enough to heat running water. Even with a power of 7 kW, the pressure of hot water is not particularly impressive. Just installed. I have it become a tie-in on the hot water pipe. Plastic fittings for water inlet / outlet were not invented by the smartest person. I understand that this is done for electrical safety, but tightening metal nuts on plastic threads is another attraction. I had to lay a separate cable of increased cross-section for power supply. The current consumed by the water heater can reach 35 amperes, and this is no longer a joke. An ordinary wire with a cross section of 2 square millimeters cannot hold such a current for a long time. Well, the regulation of water temperature by pressure is also a hemorrhoid process. Especially in winter when the water is very cold. |
Atmor InLine 5kW configurations
| Price for Atmor InLine 5kW | ||||
|---|---|---|---|---|
| Atmor InLine 5kW | from 5 540 ₴ | 9 offers | |
 | Atmor InLine 7kW | from 5 898 ₴ | 7 offers | |
- Allows you to provide multiple points at the same time
- Voltage 220
- Working pressure, bar: 0.6-5
