Atmor InLine 7kW
 |
 |
Close
Atmor InLine 7kW 3 L/min 5 kW 3 L/min 7 kW | |||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Atmor 2025 - new arrivals, bestsellers, and the most relevant models Atmor.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Atmor 2025 - new arrivals, bestsellers, and the most relevant models Atmor.
Which is better: wet or dry heating element in a water heater?Learning the design features, pros and cons of "wet" and "dry" heating elements in water heaters
Detailed FAQ on storage water heatersWe answer the most common questions regarding the installation and operation of storage water heaters
Buy Atmor InLine 7kW
Проточний водонагрівач Atmor In line 7 кВт (7290019294054) | 6 240 ₴ |  | |||
Електричний проточний водонагрівач ATMOR In Line 7 кВт/220В 3195571 | 6 299 ₴ |  | |||
Atmor Atmor In-Line 7KW | 6 299 ₴ |  | |||
| 6 110 ₴ |  | ||||
| 6 110 ₴ | | ||||
8 4 10 8 |
I live in my (separate) house and always solved the issue of hot water on my own. The previous storage type water heater failed after working for five years, and since the malfunction concerned the violation of the integrity of the tank due to metal corrosion, there was no point in repairing it. I decided to buy a new boiler with a flow one, because it is not always convenient to wait for hot water from the storage tank. Always having hot water "on demand" is very convenient, to say the least. You can use switches to change the power of the heater. There are three options: 3 kW, 4 kW, 7 kW. All of this, of course, is great, but a power of 3 or 4 kW is absolutely insufficient for heating running water. Even at 7 kW, the hot water flow is not particularly impressive. It is easy to install. In my case, it was added as a cut-in on the hot water supply pipe. Plastic fittings for water inlet / outlet were not invented by the smartest person. I understand that this is done for electrical safety, but tightening metal nuts on plastic threads is another attraction. I had to lay a separate cable of increased cross-section for power supply. The current consumed by the water heater can reach 35 amperes, and this is no longer a joke. An ordinary wire with a cross section of 2 square millimeters cannot hold such a current for a long time. Well, the regulation of water temperature by pressure is also a hemorrhoid process. Especially in winter when the water is very cold. |
Exploded after a month of use. The previous two worked for about 14 years on the same dream and with the same connection. Compact, powerful. Extremely unreliable, explosive. i recommend it don't buy |
No merit Bought an "atmol in line" for 5 square meters yesterday. The water heats very poorly to just barely warm with very minimal pressure. And then it completely shut off, and with low pressure, it does not work, while with slightly more pressure - only cold water runs. I do not recommend it, total junk. just bought Atmor InLine 7kW |
3 out of 34 user review(s) shown
10 more user review(s)
Atmor InLine 7kW configurations
| Price for Atmor InLine 7kW | ||||
|---|---|---|---|---|
 | Atmor InLine 5kW | from 5 674 ₴ | 5 offers | |
| Atmor InLine 7kW | from 6 110 ₴ | 5 offers | |
Additional features water heater Atmor InLine 7kW:
- Allows you to provide multiple points at the same time
- Voltage 220
- Working pressure, bar: 0.6-5
We recommendCompare using chart →
tank, 47 - 145 L, dry heater, 2, 2000 W, from overheating, from freezing, 112x45.4x46.1 - 96.5x45.4x46.1 cm, vertical
tank, 30 - 100 L, dry heater, 2, 2000 W, from overheating, RCD, 54.5x34.4x35.9 - 87.9x45.4x46.9 cm, vertical
tank, 50 - 100 L, dry heater, 2, 2000 W, from overheating, from freezing, 61х45х46 - 97х45х46 cm, vertical
tank, 30 - 100 L, dry heater, 2, 2500 W, from overheating, 108.2x38.2x38.2 - 88.2x38.2x38.2 cm, vertical
tank, 30 - 100 L, dry heater, 2, 2000 W, from overheating, dry heating protection, RCD, 54.5x34.4x35 - 87.9x45.4x46 cm, universal (wall)
tank, 50 - 200 L, dry heater, 2, 2000 W, from overheating, from freezing, 131x50x50 - 94.8x50x50 cm, universal (wall)
tank, 10 / 15 L, wet heater, 2000 W, from overheating, from freezing, 50x35х31 - 50х35x31 cm, vertical
tank, 50 - 100 L, dry heater, 2, 1600 W, from overheating, from freezing, 60.8x44x46.8 - 91.1x44x46.8 cm, vertical
tank, 50 - 120 L, dry heater, 2, 2000 W, from overheating, from freezing, 112.5x42x44.5 - 95x42x44.5 cm, vertical