be quiet! Pure Base 600 black (BG021)
Videos 20Photos 9 |
A fairly advanced case of the middle price range, designed to assemble a quiet and performant computer system. The model was created in the Midi Tower form factor. The main feature of the system unit is the presence of sound insulation on the sidewalls, as well as the top and front panels. The body received a chassis with a modular device. Racks for hard drives and optical drives can be detached.
If the HDD rack is partially or completely dismantled, it will be possible to install a graphics card up to 425 mm long on the chassis. If the rack is not removed, then the maximum length of expansion cards will be 280 mm. The Be quiet Pure Base 600 comes with a pair of fans. These are branded 140 mm paddle impellers from the Pure Wings 2 series with a unique bearing in the form of a threaded Rifle bushing.
Up to 5 fans can be used in the system unit. The speed of rotation of the impellers can be controlled from the interface panel, where a 3-position switch is located. Additionally, the interface panel has a pair of USB 3.2 gen1 connectors and mini-Jack sockets. On the front side there are 2 plugs for installing 5.25 ”optical drives. The back panel has 7 plugs for PCI-E redundancy. This case model has a Pure Base 600 Window BGW21 modification with a viewing window on the right sidewall.
Buy be quiet! Pure Base 600 black
All prices 10 →Be Quiet! Pure Base 600 без БП (BG021) Black BG021 | 4 099 ₴ | ||||
Корпус Be quiet! Pure Base 600 Black (BG021) Pure Base 600 Black (BG021) | 4 532 ₴ | ||||
Корпус be quiet! Pure Base 600 Black (BG021) BG021 | 3 953 ₴ | ||||
Корпус Be quiet! Pure Base 600 Black (BG021) Без БП | 3 950 ₴ | ||||
Корпус Be Quiet! Pure Base 600 Black (BG021) | 4 099 ₴ |
modularity; soundproofing; metal; enough free space; poor ventilation (not suitable for a "hot" system; thin paint layer; dull appearance Larry: use be quiet! Pure Base 600 BG022 few months |
be quiet! Pure Base 600 configurations
Price for be quiet! Pure Base 600 | ||||
---|---|---|---|---|
be quiet! Pure Base 600 black | from 3 947 ₴ | 10 offers | ||
be quiet! Pure Base 600 silver | from 3 812 ₴ | 11 offers |
I liked its modularity. The rear latches are reusable, they can be freely removed and inserted back. If you don't need all three HDD cages, you can remove them and free up space. The same applies to the drive cage, which is also removable.
The metal is normal, but it bends in those places where there are a lot of holes (for example, the top cover and the back mesh for blowing), but if you don’t specifically press in those places, then you won’t notice it. The top cover is very hard to remove, you are afraid to break something. The latches on the front panel are also tight, it's scary to break.
There is enough space inside, there is where to place the wires. No sharp edges found.
The paint layer is very thin and easily scratched. Fingerprints and dust are clearly visible on the case. The appearance of the body is boring.
The appearance of the body is boring.
Noise isolation is present, but it lacks stars from the sky. If you have a noisy HDD - you will hear it, if your turntables work at 100% - you will hear it too.
Perhaps the main disadvantage of the case is that it does not have very good ventilation (a compromise for the sake of sound insulation). Even the grilles on the front, which can be seen in the photo in the store, are half covered with plastic inserts. So if you build a hot system, pick up another case.