Kaiser MIG/MAG-265

Kaiser Welding welding machines combine high productivity and reliability in one bottle, and also take their toll with a democratic pricing policy. An excellent example of this is the universal MIG / MAG-265 unit.

Applicability

The model is used for manual arc welding with electrodes (MMA) and work with copper-plated or flux-cored wire with a cross section of 0.6-1 mm in semi-automatic mode (MIG / MAG). The range of the welding current of the device "floats" in the range from 30-40 A to 265 A. When welding with the highest current indicator for 6 minutes. continuous operation of the device must be laid for 4 minutes. "smoke break". If you lower the current to 200 A, the duty cycle of the Kaiser MIG / MAG-265 increases to 100%.

command post

The machine broadcasts the value of the welding current on a digital mini-screen in real time(only directly during welding). Handles for changing ammeter and voltage, wire pulling speed, and inductance peacefully coexist with it. Also on the front panel of the device are overload lamps and terminals “+/-” along with a connector for a 3-metre long eurosleeve (the device was originally equipped with such a “out of the box”).

in a positive way

Behind the door on the side of the "welder" there is a niche where a reel is installed for a 5-kilogram coil of wire. In the same place, they hide from prying eyes of changing polarities for working with flux-cored wire. In action, the Kaiser MIG / MAG-265 has proven itself exclusively in a positive way. However, it will be very difficult for beginners at first to find a common language with the device due to the lack of useful hot start and arc force options. Yes, and the device weighs almost 13.5 kg, which slightly limits its mobility. The more affordable cost of the model eliminates these shortcomings than that of most peers.