Milwaukee M18 CBLID-0 (4933464476)
 |
 |
Close
Milwaukee M18 CBLID-0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Model M18 CBLID-0 comes without battery, charger and case, while model M18 CBLID-402C comes with two batteries (4 Ah), charger and case
Cordless screwdriver with high torque, impact mechanism and chuck for hex bit. Maximum tightening force is 180 Nm, which allows you to tighten and loosen screws, bolts and nuts up to M14. The Milwaukee M18 CBLID-0 screwdriver is equipped with a brushless motor with a brake and an electronic overload and overheating protection system. The housing has a built-in backlight, allowing you to work comfortably and safely in low light conditions. A metal clip is screwed to the handle for hanging the tool on a belt during breaks in work. In this package, the tool is supplied without a battery and charger. The Milwaukee M18 battery should be used as a power source.
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Milwaukee 2025 - new arrivals, bestsellers, and the most relevant models Milwaukee.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Milwaukee 2025 - new arrivals, bestsellers, and the most relevant models Milwaukee.
Series Milwaukee M18 (cordless)
angle grinder, rechargeable, without battery, saw blade 125 mm, 11000 rpm, keyless change, safety clutch, additional handle
drill driver, gun, brushless motor, 550/1700 rpm, cartridge: keyless, Ø 13 mm, impact mode, reverse, power supply: battery, 18 H, 2, case
hammer drilling, 5000 bpm, without a hit, 1350 rpm, chiselling, 4 J, brushless motor, quick cartridge change, power battery, 18 В, not included, LED light, weight 4.3 kg
chainsaw, rechargeable, battery 1, bar/blade 400 mm, chain pitch 3/8 next, weight 6.4 kg
oil-free, cordless, no battery, at the exit 48 L/min, 9.31 bar, 0.4 kW, receiver: 8 L, direct drive
magnetic, up to 690 rpm, cartridge Weldon and key, spindle (quill): move 146 mm, backlight
rechargeable, up to 2800 stroke/min, stroke: 26 mm, pendulum action, LED light, weight: 2.3 kg
cordless, half-open, for cartridges: 300 ml, stock ratchet, pressure: 4500 Н, battery: 18 В, 2 Ah, 1 per set
nailer, contact, cordless, 18 В, 5 Ah, brushless motor, LED light, гвоздь: length up to 90 mm, Ø до 3.3 mm
double-cut blade, cordless, 18 В, 0 – 2500 spm, cutting thickness: 200 N/mm² up to 3.2 mm, 400 N/mm² up to 2 mm, 600 N/mm² up to 1.6 mm, 800 N/mm² up to 1.2 mm, weight 1.94 kg
electric, rechargeable, no battery, цифровой манометр, backlit, pressure: up to 10.3 Atm
angle grinder, rechargeable, without battery, saw blade 125 mm, 8500 rpm, soft start, keyless change, motor protection, additional handle
impact wrench, gun, 1800 rpm, cartridge: square drive, 3/4 ", impact mode, reverse, motor brake, power supply: battery, 18 H, 2, case
AccessoriesAll accessories for Milwaukee M18 CBLID-0 →
We recommendCompare using chart →
screwdriver, gun, brushless motor, 1100/2100/3600 rpm, cartridge: bit holder, impact mode, reverse, motor brake, power supply: battery, 18 H, not included
screwdriver, gun, brushless motor, 3600 rpm, cartridge: bit holder, impact mode, reverse, motor brake, power supply: battery, 18 H, not included
screwdriver, gun, brushless motor, 1100/2100/3200/3600 rpm, cartridge: bit holder, impact mode, reverse, motor brake, power supply: battery, 18 H, not included
screwdriver, gun, brushless motor, 2100/3300 rpm, cartridge: bit holder, impact mode, reverse, power supply: battery, 18 H, not included, case
screwdriver, gun, brushless motor, 3600 rpm, 1 speed, cartridge: bit holder, impact mode, reverse, power supply: battery, 18 H, not included
drill, gun, 1650 W, 1200 rpm, 1 speed, cartridge: key, Ø 16 mm, impact mode, reverse, power supply: mains (230 V)
drill driver, gun, 360/1400 rpm, cartridge: bit holder and quick-release, Ø 10 mm, reverse, motor brake, power supply: battery, 10.8 H, 2, case
drill driver, gun, 320 W, 450/1500 rpm, cartridge: keyless, Ø 10 mm, impact mode, reverse, power supply: mains (230 V)
drill driver, gun, 320 W, 450/1500 rpm, cartridge: keyless, Ø 10 mm, reverse, power supply: mains (230 V)
impact wrench, gun, 1450 W, 2200 rpm, 1 speed, cartridge: square drive, 1/2 ", impact mode, reverse, power supply: mains (230 V), case
drill driver, gun, 350/1300 rpm, cartridge: keyless, Ø 10 mm, reverse, power supply: battery, 12 H
drill, gun, 500 W, 2800 rpm, 1 speed, cartridge: key, Ø 13 mm, impact mode, reverse, power supply: mains (230 V)