Vitals Master AKG 1851 SmartLine Plus (194837)

semi-automatic inverter, synergistic, welding: MMA, MIG/MAG, TIG, welding current: from 30 A, up to 180 A, электрод до 4 mm, wire: from 0.8 mm, up to 1 mm, power supply: 230 В, from 160 В, display

brushless, 1650 W, 120 bar, nozzles: fan-shaped, foam gun, water suction, pressure gauge, weight 10 kg

drill driver, gun, 700 W, 400/1500 rpm, cartridge: keyless, Ø 10 mm, reverse, power supply: battery, 18 H, case

chainsaw, electric saw, 2400 W, bar/blade 400 mm, chain pitch 3/8 next, motor protection, keyless tension, weight 5.3 kg

random orbital, 300 W, saw blade 125 mm, 2000 – 6000 rpm, frequency 4000 – 12000 opm, amplitude 3 mm, speed controller, additional handle, dust collector

electric (230 V), at the entrance 380 L/min, at the exit 230 L/min, 8 bar, 2.2 kW, receiver: 55 L, direct drive

800 W, from 800 stroke/min, up to 3000 stroke/min, stroke: 23 mm, pendulum action, dust blower, LED light, laser marker, weight: 2.5 kg

pole saw, mains, 710 W, tyre 250 mm, rod 320 cm, telescopic, adjustable attachment

3000 rpm, 63 cm³, drive unit mechanical, 2.2 kW, 3 hp, 2 operators, boer: diameter 40 cm

plaster mixer, 1400 W, 480/800 rpm, spindle: M14, 2 speeds

hammer drilling, 5100 bpm, without a hit, 1300 rpm, chiselling, 850 W, 3.5 J, quick cartridge change, weight 3.3 kg

paint sprayer, corded, 500 W, consumption 0.85 L/min, nozzle 2.6 mm, storage tank: 700 mL, remote compressor

maximum 3.8 kW, 230 B, petrol, 4-stroke, tank 16 L, sockets 2, output 12V, electric starter, hour metre, 595х445х505 mm, 43.6 kg

12 kN, frequency 680 VPM, petrol, 4.7 kW, seal: 450 mm, sole: length 345 mm, width 285 mm

stationary, planing: width 110 mm, depth 3 mm, 1200 W, double-sided knives, stationary, dual dust out system

1700 W, 46 J, 1400 bpm, cartridge: SDS Hex, soft start, 18.2 kg

wall chaser, electric, 230 В, disc/cutter: 5, 150 mm, power consumption 2.4 kW, case

stationary electro, network, 800 W, 2950 rpm, disk: 200 mm, cutting length: длина реза до 720 mm, глубина реза до 36 mm, water cooling

semi-automatic inverter, synergistic, welding: MMA, MIG/MAG, TIG, welding current: from 20 A, up to 140 A, электрод до 4 mm, wire: from 0.8 mm, up to 1 mm, power supply: 230 В, from 160 В

brushless, 2500 W, 195 bar, nozzles: fan-shaped, foam gun, water suction, detergent tank, reel (drum), weight 21.1 kg