Vitals Master Ra 4016DS (52075)
 |
 |
Close
Vitals Master Ra 4016DS
Operating modes:hammer drilling, chiselling
Power:1600 W
Impact energy:9 J
Number of strokes:3530 bpm
Idle speed:560 rpm
Cartridge type:SDS Max
Power supply:mains (230 V)
Weight:7.3 kg
A network hammer drill with a 1600-horsepower engine and an impact mechanism that provides a high impact energy of 9 J. This tool can be used for drilling and impact destruction of building materials. The design does not provide for a drilling function without impact. The chuck rotation speed is adjusted using the speed controller (up to 560 rpm at maximum). When using drills with carbide brazing, the Vitals Master Ra 4016DS hammer drill can make holes in concrete with a diameter of up to 40 mm.
The chuck complies with the SDS Max standard. The hammer drill has a safety clutch, which is necessary to protect the user and the tool itself from "kickback" in the event of jamming of the nozzle, and an anti-vibration system in the form of dampers between the body and the rear handle. The kit includes a plastic case, an additional handle and a small set of equipment (drill, pick and flat chisel), as well as spare carbon brushes for the engine.
All specifications
Specifications Master Ra 4016DS
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Vitals 2025 - new arrivals, bestsellers, and the most relevant models Vitals.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Vitals 2025 - new arrivals, bestsellers, and the most relevant models Vitals.
How to Choose a Hammer DrillBrief instructions for choosing a hammer drill.
Noise levels of tools and construction equipmentThe concepts of sound power and sound pressure, as well as the differences between them in fact
Series Vitals Master (semi-pro)
semi-automatic inverter, synergistic, welding: MMA, MIG/MAG, TIG, welding current: from 20 A, up to 140 A, электрод до 4 mm, wire: from 0.8 mm, up to 1 mm, power supply: 230 В, from 160 В
drill driver, gun, 700 W, 400/1500 rpm, cartridge: keyless, Ø 10 mm, reverse, power supply: battery, 18 H, 2 Ah, 1, case
2400 W, 195 bar, pressure regulation, nozzles: fan-shaped, foam gun, water suction, detergent tank, reel (drum), weight 14.8 kg
chameleon helmet, blackout: from 5 DIN, up to 13 DIN, turning on filter: 50 ms, grinding mode, 860 g
electric (230 V), at the entrance 380 L/min, at the exit 230 L/min, 8 bar, 2.2 kW, receiver: 55 L, direct drive
hammer drilling, 5100 bpm, without a hit, 1300 rpm, chiselling, 850 W, 3.5 J, quick cartridge change, weight 3.3 kg
3000 rpm, 63 cm³, drive unit mechanical, 2.2 kW, 3 hp, 2 operators, boer: diameter 40 cm
12 kN, frequency 680 VPM, petrol, 4.7 kW, seal: 450 mm, sole: length 345 mm, width 285 mm
maximum 8.5 kW, petrol, 4-stroke, tank 25 L, sockets 2, output 12V, electric starter, autostart (ATS), ATS socket, AVR, wheels, hour metre, 710х595х570 mm, 98 kg
stationary, planing: width 110 mm, depth 3 mm, 1200 W, double-sided knives, stationary, dual dust out system
paint sprayer, corded, 500 W, consumption 0.85 L/min, nozzle 2.6 mm, storage tank: 700 mL, remote compressor
600 W, from 500 stroke/min, up to 3000 stroke/min, stroke: 30 mm, pendulum action, weight: 2.5 kg
chainsaw, electric saw, 2400 W, bar/blade 400 mm, chain pitch 3/8 next, motor protection, keyless tension, weight 5.3 kg
We recommendCompare using chart →
hammer drilling, 4675 bpm, without a hit, 1050 rpm, chiselling, 1.9 J, consistent speed, brushless motor, power battery, 18 В, 4 Ah, LED light, weight 2.3 kg
hammer drilling, 4600 bpm, without a hit, 1200 rpm, chiselling, 800 W, 2.4 J, quick cartridge change, weight 3 kg
hammer drilling, 5500 bpm, without a hit, 1500 rpm, chiselling, 800 W, 2.6 J, weight 2.6 kg
hammer drilling, 4700 bpm, without a hit, 950 rpm, chiselling, 2200 W, 6 J, weight 5.2 kg
hammer drilling, 4000 bpm, without a hit, 900 rpm, chiselling, 800 W, 2.7 J, quick cartridge change, weight 2.9 kg
hammer drilling, 4500 bpm, without a hit, 900/2100 rpm, chiselling, 1100 W, 3.4 J, 2 speed gearbox, consistent speed, quick cartridge change, weight 3.3 kg
hammer drilling, 4000 bpm, without a hit, 900 rpm, chiselling, 800 W, 2.7 J, weight 2.7 kg
