Vitals Master Ra 2680HBi (140857)
 |
 |
Close
Vitals Master Ra 2680HBi
Operating modes:hammer drilling, without a hit, chiselling
Power:800 W
Impact energy:3 J
Number of strokes:4900 bpm
Idle speed:1100 rpm
Cartridge type:SDS+
Power supply:mains (230 V)
Weight:5.4 kg
Household tool with a power of 800 W, designed for drilling (with or without impact) and chiselling in construction, repair and demolition work. The device has a decent impact energy (3 J) and is equipped with a safety clutch to protect the user and gearbox from “kickback” when the tool is jammed. Vitals Master Ra 2680HBi perforator chuck complies with the SDS + standard. The tool comes with a plastic case, an additional handle and a drilling depth gauge.
All specifications
Specifications Master Ra 2680HBi
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Vitals 2025 - new arrivals, bestsellers, and the most relevant models Vitals.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Vitals 2025 - new arrivals, bestsellers, and the most relevant models Vitals.
How to Choose a Hammer DrillBrief instructions for choosing a hammer drill.
Noise levels of tools and construction equipmentThe concepts of sound power and sound pressure, as well as the differences between them in fact
Series Vitals Master (semi-pro)
brushless, 2500 W, 195 bar, nozzles: fan-shaped, foam gun, water suction, detergent tank, reel (drum), weight 21.6 kg
chainsaw, electric saw, 2400 W, bar/blade 400 mm, chain pitch 3/8 next, motor protection, keyless tension, weight 5.3 kg
semi-automatic inverter, synergistic, welding: MMA, MIG/MAG, TIG, welding current: from 20 A, up to 140 A, электрод до 4 mm, wire: from 0.8 mm, up to 1 mm, power supply: 230 В, from 160 В
oil-free, electric (230 V), at the entrance 79 L/min, at the exit 48 L/min, 8 bar, 0.95 kW, receiver: 24 L, direct drive
impact wrench, gun, 1050 W, 2200 rpm, 1 speed, cartridge: square drive, 1/2 ", impact mode, reverse, power supply: mains (230 V), case
3000 rpm, 63 cm³, drive unit mechanical, 2.2 kW, 3 hp, 2 operators, boer: diameter 40 cm
chameleon helmet, blackout: from 5 DIN, up to 13 DIN, turning on filter: 50 ms, grinding mode, 860 g
maximum 3.8 kW, 230 B, petrol, 4-stroke, tank 16 L, sockets 2, output 12V, electric starter, hour metre, 595х445х505 mm, 43.6 kg
hammer drilling, 5100 bpm, without a hit, 1300 rpm, chiselling, 850 W, 3.5 J, quick cartridge change, weight 3.3 kg
stationary, planing: width 110 mm, depth 3 mm, 1200 W, double-sided knives, stationary, dual dust out system
600 W, from 500 stroke/min, up to 3000 stroke/min, stroke: 30 mm, pendulum action, weight: 2.5 kg
2000 W, from 50 °C, up to 600 °C, 550 L/min, stepless t control, weight: 950 g, case, scraper, putty knife, nozzles, 4
paint sprayer, corded, 500 W, consumption 0.85 L/min, nozzle 2.6 mm, storage tank: 700 mL, remote compressor
We recommendCompare using chart →
hammer drilling, 4300 bpm, without a hit, 1100 rpm, chiselling, 1200 W, 3 J, quick cartridge change, weight 3 kg
hammer drilling, 5200 bpm, without a hit, 2200 rpm, chiselling, 850 W, 3 J, quick cartridge change, weight 2.4 kg
hammer drilling, 4800 bpm, without a hit, 1300 rpm, chiselling, 1200 W, 3.8 J, weight 3.2 kg
hammer drilling, 5700 bpm, without a hit, 1400 rpm, chiselling, 800 W, 3 J, weight 2.8 kg
hammer drilling, 4400 bpm, without a hit, 1100 rpm, chiselling, 1200 W, 3 J, weight 3.1 kg
hammer drilling, 4800 bpm, without a hit, 1300 rpm, chiselling, 1100 W, 3.8 J, weight 3 kg
hammer drilling, 4000 bpm, without a hit, 1250 rpm, chiselling, 850 W, 2.8 J, weight 2.7 kg
hammer drilling, 4000 bpm, without a hit, 800 rpm, chiselling, 850 W, 5 J, weight 4.6 kg
hammer drilling, 4850 bpm, without a hit, 920 rpm, chiselling, 820 W, 3 J, weight 2.4 kg
