Vitals Master Ra 4216NC (219874)
 |
 |
Close
Vitals Master Ra 4216NC
Operating modes:hammer drilling, without a hit, chiselling
Power:1600 W
Impact energy:12 J
Number of strokes:3600 bpm
Idle speed:630 rpm
Cartridge type:SDS Max
Power supply:mains (230 V)
Weight:6.6 kg
All specifications
Specifications Master Ra 4216NC
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
How to Choose a Hammer DrillBrief instructions for choosing a hammer drill.
Noise levels of tools and construction equipmentThe concepts of sound power and sound pressure, as well as the differences between them in fact
Series Vitals Master (semi-pro)
brushless, 2500 W, 195 bar, nozzles: fan-shaped, foam gun, water suction, detergent tank, reel (drum), weight 21.6 kg
semi-automatic inverter, synergistic, welding: MMA, MIG/MAG, TIG, welding current: from 20 A, up to 140 A, электрод до 4 mm, wire: from 0.8 mm, up to 1 mm, power supply: 230 В, from 160 В
chainsaw, electric saw, 2400 W, bar/blade 400 mm, chain pitch 3/8 next, motor protection, keyless tension, weight 5.3 kg
drill driver, gun, 700 W, 400/1500 rpm, cartridge: keyless, Ø 10 mm, reverse, power supply: battery, 18 H, 2 Ah, 1, case
electric (230 V), at the entrance 380 L/min, at the exit 230 L/min, 8 bar, 2.2 kW, receiver: 55 L, direct drive
chameleon helmet, blackout: from 5 DIN, up to 13 DIN, turning on filter: 50 ms, grinding mode, 860 g
3000 rpm, 63 cm³, drive unit mechanical, 2.2 kW, 3 hp, 2 operators, boer: diameter 40 cm
hammer drilling, 5100 bpm, without a hit, 1300 rpm, chiselling, 850 W, 3.5 J, quick cartridge change, weight 3.3 kg
maximum 3.8 kW, 230 B, petrol, 4-stroke, tank 16 L, sockets 2, output 12V, electric starter, hour metre, 595х445х505 mm, 43.6 kg
600 W, from 500 stroke/min, up to 3000 stroke/min, stroke: 30 mm, pendulum action, weight: 2.5 kg
stationary, planing: width 110 mm, depth 3 mm, 1200 W, double-sided knives, stationary, dual dust out system
paint sprayer, corded, 500 W, consumption 0.85 L/min, nozzle 2.6 mm, storage tank: 700 mL, remote compressor
12 kN, frequency 680 VPM, petrol, 4.7 kW, seal: 450 mm, sole: length 345 mm, width 285 mm
2400 W, 195 bar, pressure regulation, nozzles: fan-shaped, foam gun, water suction, detergent tank, reel (drum), weight 14.8 kg
We recommendCompare using chart →
hammer drilling, 4100 bpm, without a hit, 520 rpm, chiselling, 1850 W, 9 J, consistent speed, weight 6.9 kg
hammer drilling, 4000 bpm, without a hit, 590 rpm, chiselling, 1500 W, 10 J, weight 7.3 kg
hammer drilling, 3530 bpm, without a hit, 560 rpm, chiselling, 1600 W, 9 J, weight 7.3 kg
hammer drilling, 4600 bpm, without a hit, 1200 rpm, chiselling, 800 W, 2.4 J, quick cartridge change, weight 3 kg
hammer drilling, 4000 bpm, without a hit, 1100 rpm, chiselling, 800 W, 3 J, weight 2.6 kg
hammer drilling, 5500 bpm, without a hit, 1500 rpm, chiselling, 800 W, 2.6 J, weight 2.6 kg
hammer drilling, 4700 bpm, without a hit, 950 rpm, chiselling, 2200 W, 6 J, weight 5.2 kg
hammer drilling, 4000 bpm, without a hit, 900 rpm, chiselling, 800 W, 2.7 J, quick cartridge change, weight 2.9 kg
hammer drilling, 4000 bpm, without a hit, 900 rpm, chiselling, 800 W, 2.7 J, weight 2.7 kg
hammer drilling, 5500 bpm, without a hit, 1300 rpm, chiselling, 920 W, 2.7 J, quick cartridge change, weight 2.8 kg
hammer drilling, 5100 bpm, without a hit, 1300 rpm, chiselling, 1000 W, 3.2 J, quick cartridge change