Wilo Star-RS 25/6 6 m 1 1/2" 180 mm (4032956)
Wilo Star-RS 25/6 6 m
1 1/2"
180 mm
Suitable for:central heating
Performance:4000 L/h
Max. head:6 m
Power consumption:84 W
Speeds:3
Connection type:thread
All specifications
Specifications Star-RS 25/6
|
|
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Wilo 2024 - new products, best sales and most actual models Wilo.
Before buying always check characteristics and configuration of product with online store manager
Catalog Wilo 2024 - new products, best sales and most actual models Wilo.
Buy Wilo Star-RS 25/6 6 m 1 1/2" 180 mm
Wilo WILO Star-RS 25/6-180 (4032956) | 1 380 ₴ | ||||
Насос Wilo Star-RS 25/6 1x230 | 5 566 ₴ | ||||
Циркуляційний насос Wilo WRS 25/6-180 | 1 587 ₴ | ||||
Циркуляційний насос WILO Star-RS 25/6 180 мм | 8 302 ₴ |
2 1 6 16 |
Initially, they wanted to take Grundfos, but the required model was not available, the seller advised Vilo Star. We bought this for an enterprise in a pipeline cooling system, it works without any special claims. Since production is continuous, the pump itself runs around the clock with rare power outages every two months. Looking at the price, I can say that he has already worked his money three times so accurately. The device is connected to the automation system, so there is no need to go to it, which means that it is rarely visually inspected. Recently I noticed a slight noise in the new state, this was definitely not the case, but since the case itself does not fall apart and the pressure keeps stable, no one will remove it for inspection or repair. I understand, of course, that this equipment is far from industrial, but that it cost the manufacturer to add pumping speed control in addition to manual, also remotely using a control signal in everyday life, such an opportunity would also be in demand. What I liked was the ability to remove and fix the terminal box with the cable entry on any of the four available sides, in this case the pump is right next to the cable trays, and this option was very useful. possibility of horizontal installation;
comes with seals and installation instructions; on the body in the area of the nozzles there is an ebb under the open-end wrench, which helped during installation on the pipeline; resistant to current surges; there are spring-loaded terminals in the terminal box for connection. there was a slight noise after a few years of use;
no remote control option. use Wilo Star-RS 25/6 month or more |
He worked honestly for 10 years and began to rattle! I think he justified his cost for all the years! Reliability Price |
One of three rotation speeds can be selected in order to adjust the pump power. Convenient if you do not need to immediately start at maximum power. Cast iron body and fiberglass reinforced wheel. It's been running for over a year now and there hasn't been a single failure. You can connect the power supply very quickly using the spring terminals. You don’t need to solder anything anywhere, screw it on or somehow fool around with the wires, clamped the contacts with a terminal and that’s it. The motor is resistant to voltage drops, that is, it works stably with small jumps. In case of serious drops, however, it can turn off, but this is not a problem. Suitable for any mounting position. True, the shaft must be located horizontally. It consumes a little more electricity than we would like. But it provides an excellent flow of water, so there is nothing to complain about. use Wilo Star-RS 30/2 month or more |
3 out of 26 user review(s) shown
10 more user review(s)
Wilo Star-RS 25/6 configurations
Price for Wilo Star-RS 25/6 | ||||
---|---|---|---|---|
Wilo Star-RS 25/4-130 4 m 1 1/2" 130 mm | from 3 590 ₴ | 1 offer | ||
Wilo Star-RS 25/4 4 m 1 1/2" 180 mm | from 1 090 ₴ | 6 offers | ||
Wilo Star-RS 25/6-130 6 m 1 1/2" 130 mm | from 5 566 ₴ | 2 offers | ||
Wilo Star-RS 25/6 6 m 1 1/2" 180 mm | from 1 380 ₴ | 4 offers |
We recommendCompare using chart →