Five productive centrifugal juicers

Stylish centrifugal juicer Panasonic MJ-CB100 is made in a minimalist design to match any kitchen interior. In one sitting, she can prepare several servings of freshly squeezed juice for a large family.

Through a large opening in the neck with a width of 75 mm, fruits and vegetables can be loaded into the device without particularly chopping them beforehand. True, it is still advisable to cut the hardest fruits with a knife before squeezing juice from them. The core of vegetables and fruits is firmly cut through the S-shaped cutter Full Metal Spinner, and the low-angle cutter finely grinds the raw materials. Fine filter mesh effectively separates the juice from the pulp.

The finished product is supposed to be collected in a large one and a half liter container for juice. The cake is automatically sent to the appropriate 2-liter container. In total, the model provides for two operating speeds: the first is suitable for processing soft products (oranges, tomatoes, etc.), the second - for hard ingredients (apples, carrots, etc.). A single rotary mechanical handle with a marked speed scale "0", "1" and "2" is responsible for controlling the operation of the device.

The Panasonic MJ-CB100 is powered by a powerful 1000-watt motor with an overheat protection system. Of the other attributes of the juicer , the lifting spout bothers to pay attention - by raising it a little up, the working surface is protected from unintentional dripping of juice droplets. Removable parts of the device can be washed in the dishwasher, which simplifies the care of the juicer after use.

The multi-speed centrifugal juicer Zelmer ZJE 6800 does an excellent job of processing the harvest of vegetables and fruits into tasty and healthy juices. And that's what it is good for.

The body of the device is made of steel and plastic. Directly adjacent to it is a 2-liter cake container, and a separate 1.1-liter container is provided for collecting juice. The competitive advantage of the model over peers is a wide loading neck with a diameter of 85 mm. This size minimizes the process of preliminary preparation of raw materials, since many fruits can be loaded whole or in halves into the receiving opening.

"Under the hood" of the juicer is an 800 watt engine. An electronic control system with a small info display allows you to adjust the speed of the device in one of five preset modes. The icing on the cake is pulse mode for processing the hardest and most stubborn products. In it, the juicer motor does not work constantly, but with short pauses. This allows you to increase the spinning efficiency and avoid unnecessary stress.

Zelmer ZJE 6800 is equipped with a separator with a built-in chopper, as well as blades for automatic pulp discharge. In order to avoid spillage of juice residues on the work surface, the model provides for a “drop-stop” system. Finally, for the safe operation of the juicer, the systems of protection against accidental switching on and automatic shutdown of the electric motor in case of overheating are responsible.

In the extensive portfolio of the German brand Bosch there are any tools, household and kitchen appliances. Take, for example, the MES3500 centrifugal juicer, a high-quality and practical product at an affordable price.

The device will serve as a faithful assistant in preparing fortified juices for the winter from home harvest, and the model can also be used in the daily rhythm of life for making freshly squeezed juices from vegetables and fruits. The juicer's loading neck has a diameter of 73 mm - it easily accommodates medium-sized apples and other fruits without pre-cutting. The spent cake is automatically discarded into a 2-liter removable container.

The Bosch MES3500 has an anti-drip system and a reliable Active Motor Management security system, thanks to which the device turns on only if it is properly assembled. Freshly squeezed juice is supposed to be collected in a capacious glass with a volume of 1.25 liters with a defoamer. The model has two speed modes: for soft and hard products.

All elements of the juicer design, with the exception of the motor unit, can be washed in a dishwasher. In general , the device is assembled in a durable stainless steel case with anchor points in the form of suction cups and a compartment for storing excess power cord. Of the features of the model, it is worth highlighting that when squeezing juice at the first speed, the cake often turns out to be too wet. At the second speed, this problem is practically reduced to nothing. And the best way out of the situation is to re-run the processed mass through the knives and juicer separator.

The Profi Cook PC AE 1156 model prepares fresh vegetable and fruit juices literally in seconds. Moreover, the juicer does an excellent job of processing the toughest fruits and nuts thanks to the pulse and turbo operation.

An 800-watt electric motor is installed inside the stainless steel juicer housing. The model works according to a knurled scheme - due to centrifugal force, the juice is separated from the pulp, which is sent to a special container for cake (1.8 l). The finished product is poured through the spout into a separate container with a volume of 1 liter. The user is kindly given 5 speeds of the device to choose from. At a slow pace, Profi Cook PC AE 1156 qualitatively processes soft vegetables and fruits into juice, at high speeds (up to 18,000 rpm) it grinds the hardest foods.

The model is equipped with an automatic pulp ejection system. To clean the device after use, it is often enough to remove the removable pulp container, empty it and wash it. A separate line in the device marks the separation function - it automatically separates the foam from freshly squeezed juice. The finished product spout of the model is adjustable in height and armed with a drop-stop system.

The juicer uses an electronic control circuit with touch buttons and a small info screen to display the selected operating speed. The buttons and display are also backlit with a pleasant blue backlight. The rubberized feet are responsible for the stable position of the device on the work surface. Well, the safety systems of the juicer are represented by protection functions against overheating and accidental activation during improper assembly. Profi Cook PC AE 1156 is a semi-professional class model that copes with the preparation of vitamin drinks for the winter and is useful for everyday preparation of freshly squeezed juices from a wide variety of ingredients.

The German juicer from Braun with the model index J700 belongs to the line of productive centrifugal models MultiQuick 7, which are distinguished by simple and comfortable operation.

The kitchen appliance looks solid in a combined steel and plastic case, and its innovation and design have been recognized by numerous awards from the professional community. Removable structural elements are easily fixed with two side clips, and the control of the two speeds of the 1000-watt electric motor is performed by a single rotary knob. The front panel is equipped with a mechanical anti-drip function, which is activated when a button with the corresponding symbol is pressed. Under it is a cylindrical niche for convenient installation of a measured juice container (1.25 l) with a foam separator and a lid.

Please note that when the juice collection tray or filter is not in its place, and the lid is not fixed tightly with clips, the machine will not turn on. If the clamps are released while the device is running, the motor drive will stop within 3 seconds. Reliable motor of excellent quality with a four-stage safety system, including protection against overheating, ensures continuous operation of the juicer for 15 minutes. During this time, 5 kg of vegetables and fruits can be processed into juice, and the first glass of a fresh drink will be ready in 15 seconds. This spin speed is supported by the automatic product feed system. Such characteristics are rarely found in similar devices from other manufacturers, whose devices need a break after 3 to 5 minutes of operation.

Another nice bonus of this model is a compartment with a reel for storing the cord, located at the bottom of the base of the case. The manufacturer confirms the high quality of workmanship and assembly with a 2-year warranty for the device.