WD Blue SSD 3D NAND WDS500G2B0A 500 GB
 |
 |
Close
WD WDS500G2B0A | |||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||
High-performance and capacious internal SSD drive with SATA 3 connection interface. Despite the use of TLC memory, this model shows consistently high performance both in read operations (550 Mbps) and in write operations (at least 400 Mbps). Such results are achieved by using a hardware platform based on the Marvell 88SS1074 controller with a 512 MB LDDR3-1866 DRAM buffer and Sandisk's high-tech 64-layer BiCS3 3D TLC NAND flash memory.
The controller is based on two ARM Dragonite v5 cores, supports error correction based on LDPC codes and works with memory in a 4-channel scheme. BiCS3 3D memory provides much higher performance and lower latency compared to the old planar memory. The overall performance of the WD Blue SSD 3D NAND [WDS500G2B0A] drive is ahead of many competing products, allowing the manufacturer to position this model in the middle price category. The drive can be used to create hardware configurations for modern home/office personal computers and entry-level workstations (with a small disk load). The specifications claim a guaranteed recording capacity of 200 TB, which makes it possible to record up to 55 GB of data daily for 10 years. In addition, there is a full three-year warranty.
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog WD 2025 - new arrivals, bestsellers, and the most relevant models WD.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog WD 2025 - new arrivals, bestsellers, and the most relevant models WD.
TLC, QLC, MLC, SLC: which type of drive memory is better?Important differences between the types of NAND memory TLC, QLC, MLC, SLC, which determine the scope of their use and development prospects
How to choose the right SSD?Choosing an SSD with the required speed and good reliability for home, work and gaming
Series WD Blue (for mass consumption)Compare using chart →
1000 GB, M.2, 22x80, PCI-E 4.0 4x, 3D TLC NAND, write: 4150 MB/s, read: 4150 MB/s, warranty 5 years
2000 GB, M.2, 22x80, PCI-E 4.0 4x, 3D TLC NAND, write: 4150 MB/s, read: 4150 MB/s, warranty 5 years
1000 GB, M.2, 22x80, PCI-E 4.0 4x, 3D TLC NAND, write: 4900 MB/s, read: 5150 MB/s, warranty 5 years
500 GB, M.2, 22x80, PCI-E 4.0 4x, 3D TLC NAND, write: 4000 MB/s, read: 5000 MB/s, warranty 5 years
4000 GB, M.2, 22x80, PCI-E 4.0 4x, 3D QLC NAND, write: 5000 MB/s, read: 5500 MB/s, warranty 5 years
250 GB, M.2, 22x80, PCI-E 4.0 4x, 3D TLC NAND, write: 2000 MB/s, read: 4000 MB/s, warranty 5 years
2000 GB, M.2, 22x80, PCI-E 4.0 4x, 3D TLC NAND, write: 4850 MB/s, read: 5150 MB/s, warranty 5 years
1000 GB, M.2, 22x80, SATA 3, 3D TLC NAND, write: 520 MB/s, read: 560 MB/s, warranty 5 years
500 GB, M.2, 22x80, PCI-E 4.0 4x, 3D TLC NAND, write: 3600 MB/s, read: 4000 MB/s, warranty 5 years
2000 GB, M.2, 22x80, SATA 3, 3D TLC NAND, write: 500 MB/s, read: 520 MB/s, warranty 5 years
250 GB, M.2, 22x80, PCI-E 3.0 4x, 3D TLC NAND, write: 1200 MB/s, read: 3300 MB/s, warranty 5 years
500 GB, M.2, 22x80, SATA 3, 3D TLC NAND, write: 510 MB/s, read: 560 MB/s, warranty 5 years
500 GB, M.2, 22x80, PCI-E 3.0 2x, 3D TLC NAND, write: 1450 MB/s, read: 1700 MB/s, warranty 5 years
2 0 2 4 |
Cloning Windows 7 from HDD to SSD was straightforward with the Acronis True Image program. The drive has ceased to be the system's bottleneck, plus the long-awaited fast startup of Windows. I installed my favorite games on the SSD, and fps increased on ultra settings. On the manufacturer's website, you can download the Acronis True Image software, which activates when the system detects this SSD. Then you can clone the drive with Windows. There is also a step-by-step guide for cloning Windows on the site. The absence of screws, but they are missing in 95% of SSD kits. It doesn't matter, they can be purchased separately, along with a bracket for the 3.5" bay (rails).  gorg1981: use WD WDS500G2B0A less than month |
Damn it, this disc can be called, albeit with a stretch, shock-resistant. I dropped it with my claws 2 times - no change in performance. Does not overheat. Does not lose performance (as of now). Waiting for me in future use, who knows... use WD WDS250G2B0A more than year |
Пользуюсь 10 месяцев. Крепкий,скорость держит. Не нагревается выше 35 градусов. Нет проблем с совместимостью. Почему-то Windows 10 возмущается и не хочет вставать на этот диск. |
3 out of 8 user review(s) shown
5 more user review(s)
WD Blue SSD 3D NAND WDS500G2B0A configurations
| Price for WD Blue SSD 3D NAND WDS500G2B0A | ||||
|---|---|---|---|---|
| WD Blue SSD 3D NAND WDS250G2B0A 250 GB | from 2 811 ₴ | 7 offers | |
| WD Blue SSD 3D NAND WDS500G2B0A 500 GB | from 3 099 ₴ | 1 offer | |
| WD Blue SSD 3D NAND WDS100T2B0A 1 TB | from 3 767 ₴ | 2 offers | |
| WD Blue SSD 3D NAND WDS400T2B0A 4 TB | from 15 804 ₴ | 1 offer | |
Video reviews
ОНИ БЫСТРЕЕ, чем обещал производитель! ➔ Тест и обзор недорогих WD SSD Blue 3D NAND
3 October 201775 244 view
WD SSD Blue 3D NAND: надежный и недорогой апгрейд
5 October 201711 869 view
WD Blue 3D NAND SATA SSD
5 June 201727 029 view
WD Blue - 3D NAND SATA SSD - Russian
21 June 20171 721 view
WD Blue 3D NAND SSD
21 August 20171 666 view
We recommendCompare using chart →
500 GB, 2.5", 3D TLC NAND, write: 530 MB/s, read: 560 MB/s, SATA 3, DRAM buffer, warranty 5 years
512 GB, 2.5", 3D TLC NAND, write: 520 MB/s, read: 560 MB/s, SATA 3, DRAM buffer, warranty 3 years
1000 - 8000 GB, M.2, 22x80, PCI-E 4.0 4x, 3D TLC NAND, 6300 / 6600 MB/s, IOPS 1100 / 1200 K, 7200 / 7300 MB/s, IOPS 800 / 1200 K
500 - 4000 GB, M.2, 22x80, PCI-E 4.0 4x, 3D TLC NAND / 3D QLC NAND, 4000 - 5000 MB/s, IOPS 770 / 900 K, 5000 - 5500 MB/s, IOPS 460 - 730 K
128 - 4000 GB, 2.5", 3D TLC NAND, 380 - 520 MB/s, IOPS 70 - 89 K, 530 / 560 MB/s, IOPS 35 - 90 K
