Zanussi ZWH/S 100 Splendore
 |
 |
Close
Zanussi ZWH/S 100 Splendore | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Zanussi 2025 - new arrivals, bestsellers, and the most relevant models Zanussi.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Zanussi 2025 - new arrivals, bestsellers, and the most relevant models Zanussi.
Which is better: wet or dry heating element in a water heater?Learning the design features, pros and cons of "wet" and "dry" heating elements in water heaters
Detailed FAQ on storage water heatersWe answer the most common questions regarding the installation and operation of storage water heaters
Series Zanussi HouseholdCompare using chart →
tank, 50 L, 2000 W, 2 heaters, magnesium anode, protection: from overheating, RCD, anti-legionella
tank, 100 L, 2000 W, 2 heaters, stainless steel tank, magnesium anode, protection: from overheating, dry heating protection, RCD
tankless, gas, heat exchanger 18.5 kW, при Δt ~25°C 10 L/min, при Δt 50°C 5 L/min, chimney, protection: from overheating, gas control, draft sensor
tank, 30 L, 1500 W, magnesium anode, protection: from overheating, dry heating protection
tank, 80 L, 2000 W, 2 heaters, stainless steel tank, magnesium anode, protection: from overheating, dry heating protection, RCD
tank, 50 L, 1500 W, magnesium anode, protection: from overheating, dry heating protection
tank, 50 L, 2000 W, 2 heaters, stainless steel tank, magnesium anode, protection: from overheating, dry heating protection, RCD
tank, 80 L, 2000 W, 2 heaters, magnesium anode, protection: from overheating, RCD, anti-legionella
tank, 100 L, 2000 W, 2 heaters, magnesium anode, protection: from overheating, RCD, anti-legionella
tank, 50 L, 1500 W, magnesium anode, protection: from overheating, dry heating protection
tank, 80 L, 1500 W, magnesium anode, protection: from overheating, dry heating protection
tank, 100 L, 1500 W, magnesium anode, protection: from overheating, dry heating protection
tank, 30 L, 2000 W, 2 heaters, stainless steel tank, magnesium anode, protection: from overheating, dry heating protection, RCD
tank, 80 L, 1500 W, magnesium anode, protection: from overheating, dry heating protection
tank, 100 L, 1500 W, magnesium anode, protection: from overheating, dry heating protection
Bought a 100-liter one. 1 - Terribly noisy, 2 - Cracks when I turn on hot water, 3 - Water smells awful. Service doesn’t come, excuses (it’s scale on the heating element making the noise, remove it or install a sacrificial anode from a different company, and the water won't smell; all at your expense). Warranty 0... Shape All use Zanussi ZWH/S 100 Splendore few months |
This is not my first water heater, but the first device with a stainless steel tank. The duck wash option is the best way to avoid tank corrosion problems in the future. Protective enamels crack, and even for expensive models of prestigious brands, this is just a matter of time, magnesium anodes dissolve and do not always provide full protection throughout their service life, and only high-quality stainless steel always remains stainless steel)) This is a beautiful and compact storage water heater with a depth of only 25 centimeters. In the back room where it is installed, there was very little free space, so something else would hardly fit there. The main feature of this model is an internal tank made of high-quality chromium-nickel stainless steel. In principle, it is not subject to corrosion in water, and in order for the welds to fully retain their protective properties, the manufacturer used a special argon welding. With a modest volume of 30 liters (you need no more than 12-14 of them, the rest is a reserve), the water heater is equipped with two independent tubular electric heaters. Their total power is 2 kW, which allows you to warm up all the water from 14 degrees to a maximum of 75 in a little longer than an hour (more precisely, in 65-70 minutes). But to save money, you can turn off one of them, then the heating will be slower, but the specific power consumption will also decrease. I set the target temperature using the regulator knob located at the bottom. The regulator is not electronic, but the simplest and most trouble-free - thermomechanical, which is also a big plus for our conditions of not very stable mains voltage. 2 year warranty for electrics and 7 years for tank integrity. Quite high, as for a water heater of this volume, the price. However, the stainless steel tank itself is worth a lot and the long warranty also did not come out of thin air)) |
2 out of 3 user review(s) shown
1 more user review(s)
We recommendCompare using chart →
tank, 100 L, 2000 W, 2 heaters, magnesium anode, protection: from overheating, RCD, anti-legionella
tank, 100 L, 2000 W, 2 heaters, magnesium anode, dry heater, protection: from overheating
tank, 100 L, 2000 W, 2 heaters, glass-ceramic, magnesium anode, dry heater, protection: from overheating
tank, 100 L, 2000 W, 2 heaters, magnesium anode, dry heater, protection: from overheating
tank, 100 L, 2000 W, 2 heaters, magnesium anode, dry heater, protection: from overheating
tank, 100 L, 2 tanks, 2000 W, 2 heaters, magnesium anode, dry heater, protection: from overheating
tank, 100 L, 2 tanks, 2000 W, 2 heaters, magnesium anode, smart mode, programmer, control via Internet, protection: from overheating, from freezing, dry heating protection, RCD, anti-legionella
tank, 100 L, 2000 W, 2 heaters, magnesium anode, dry heater, protection: from overheating, from freezing
