Укр|Eng|Рус
Ukraine

Forte ACDR-10kVA 10 kVA (45770)

Photos - AVR Forte ACDR-10kVA 10 kVA
Videos 2Photos 3
Forte ACDR-10kVA 10 kVA
Type:relay
Power:10 kVA
Input voltage:140-260 V
Efficiency:98 %
Output accuracy (±):8 %
Sockets:with grounding
Cooling:active
Mount:wall
How to choose a surge protectorWe consider from different angles the issues of protecting household appliances from too high or low voltage
All  specifications

Buy Forte ACDR-10kVA 10 kVA

All prices 10 →

Стабилизатор напряжения FORTE ACDR-10kVA

Мощность: 10 кВт; Тип стабилизации: Релейный; Граничное входное напряжение: 140 - 260 В; Точность стабилизации: 8 %;... moreЗащита от: перегрева, короткого замыкания, повышенного и пониженного напряжения
Technofox.com.ua6 year with us
(Kyiv)
Warranty: 12 month
Report
11 700 

Forte ACDR-10kVA (29811)

Сегодня со скидкой!
Palladium.uaWith us more than 10 years
(Kyiv)
Report
14 719 

Forte ACDR-10kVA (10 кВт) BP-45770

БТ-сервіс9 year with us
(Kyiv)
Report
15 700 

Forte ACDR-10kVA (29811)

Mobitek.com.ua2 year with us
(Kyiv)
Report
13 678 

Стабілізатор напруги Forte ACDR-10kVA (10кВт) 29811

АЛЛОWith us more than 10 years
(Kyiv)
Warranty: 12 month
Report
15 834 
5 more offer(s)
1
1
2
0
good model, I liked it
  
Two months ago I installed one in my parents' house. Previously, they had no problems with voltage, but times are changing, consumption is growing at times. Electric kettles, washing machines, microwave ovens and even full-fledged electric heating lead to the fact that the voltage drops to very indecent values of 155-160 volts. At the same time, a significant part of household appliances either does not work at all, or desperately fails. I was especially worried about the gas boiler and a good roomy refrigerator, bought only last year. Yes, the problem of outdated power grids in the private sector is already visible to the naked eye, but the power engineers don’t care deeply, they are not going to invest in the modernization of their own infrastructure. The issue was resolved by purchasing this powerful stabilizer.
The real long-term power of this stabilizer is about 7.5 kW and this is good power, which is enough for a medium-sized house. True, it will be enough only on the condition that electricity will not be heavily used for heating. But the parents have gas heating, and the house is insulated. Holds tension well. Regardless of what the input indicator shows, I consistently observe 220-225 volts at the output. The entire standard household set (kettle, iron, microwave, washing machine, refrigerator, TV and air conditioning) pulls without question. It has all the necessary protections and a delay start, which can reach 180 seconds. It makes sense for refrigerators that it is undesirable to restart before the freon has completely drained to the compressor. Copes with starting currents and can work stably with short-term overload.
Oh, this is still a fashion to indicate power in volt-amperes. Most ordinary users think that one watt equals one volt-ampere. In fact, 10,000 volt-amperes of power of this stabilizer must be multiplied by a factor of 0.8 to convert to watts. But the manufacturer does not want to show the real power, let the beautiful "inflated" figure 10000 flaunt better.
Problems in work (8 years plowed honestly), I plan a thyristor and 9000kva
  
Bought for a summer residence
This is the first purchase of this type of equipment.
After the house began to "overgrown" with kitchen and household appliances, it became necessary.
Not high cost and ease of installation, electronic display and the ability to select a turn-on delay (important for a refrigerator)
It's been almost 8 years now...
It stands in the corridor under the meter ... they click on the relays quite loudly ... taking into account the "a little wild" country electricity ... lovers of transformer welding - STRAIN
This spring I didn’t want to turn on (I turn off for the winter ... lighting and security equipment from another wire, BUT also from the meter!)
I had to "train" with the switch ... squeaked ... wrote scribbles on the screen ... but it started.
Another problem arose - at an input voltage of 200-210, the relays frantically switch ... the refrigerator and microwave already jump .. (my heart too). They can also breathe.
I can’t do without a stabilizer - in the morning up to 260 V at the input ... everything will fly, but this one probably runs out of resources.
I will take a new one
Романuse Forte ACDR-5kVA more than year
It is worth taking into account the above data.
  
A normal stabilizer, in case of going beyond the normal voltage limits, protection is triggered. Indication of both voltages (before and after stabilization), however, after stabilization lies within 10 volts, before stabilization it shows "honestly". At the expense of spare parts, I wonder what they did not find, everything is simple there. It is a relay, which means that if your load is constantly changing (let's say an induction oven, or a microwave oven) or the input voltage jumps often, then the relays will often switch and quickly fail. (40 UAH + replacement). I have 2 relays in 2 years.
Price.
Nothing for that price. Sensitivity to frequent voltage drops.
use Forte ACDR-5kVA more than year
3 out of 4 user review(s) shown
1 more user review(s)
anonim
29 January 2022, 14:28
Как уменьшить порог отключения #
anonim
31 July 2020, 11:41
Шум от стабилизатора #
Здравствуйте! Стабилизатор в работе 6 лет. Установлен в коридоре перед квартирой на стене рядом со эл.счётчиком.
Со вчера появился жуткий свист-гул от стабилизатора. При включении рычага включения стабилизатора шум не исчезает.
Что это? Как устранить данную проблему?
anonim
17 July 2019, 13:29
Сам Завищує напругу #
3 out of 9 question(s) shown
6 more question(s)
Video reviews

Forte ACDR-10kVA configurations

Price for Forte ACDR-10kVA
Forte ACDR-5kVA 5 kVAfrom 7 515 2 offers
Forte ACDR-8kVA 8 kVAfrom 11 500 1 offer
Forte ACDR-10kVA 10 kVAfrom 11 700 10 offers

Forte ACDR-10kVA 10 kVA price graph

  • Minimum
  • Average
  • Maximum
Filters
Forte ACDR-10kVA often compared
Sven AVR PRO LCD 10000