The best orderlies of the forest: TOP 5 chainsaws

The low-cost chainsaw is equipped with a 450 mm long tyre for pruning branches, shrubs and felling trees. According to the manufacturer, the saw can cut down trees up to 400 mm thick, but users note that it freely saws trees up to 800 mm (in two passes). Automatic chain lubrication is perfectly organized here, thanks to which the oil is distributed as much as possible throughout the tyre during operation, without losing a single drop. The device also provides for the possibility of self-adjustment of the chain lubrication depending on the material being cut. So for pruning thin branches, the oil supply can be reduced, and when cutting thick logs, it can be increased. The saw itself is quite heavy (6.9 kg), so you will have to take a break more often.

The unit operates from a mixture of oil and 95 gasoline. A tank with a volume of 550 mL is enough for an hour of continuous operation. There is a transparent indicator of the level of the gasoline-oil mixture on it, so that you can top up the fuel in time (there is no such indicator on the chain lubrication tank). On top of the housing there is a quick access to the filter: just turn the lever and remove the filter for cleaning. However, the filter itself is paper, so in two or three months it may fail and it will have to be changed. Also note that the model does not provide a toothed stop at the base of the tyre, which on the one hand is used for convenient sawing logs, and on the other protects the body from impact (if the saw is pulled forward sharply). But even in a big frost, it starts with half a turn. The saw has an Easy Start system, which, according to the manufacturer, significantly reduces the wear of the starter compared to models of the same category.

The chain saw is equipped with an easy start system (as in Patriot PT 4518 ), which provided a reduction in the load on the starter cord. The engine power of 2200 watts is enough for sawing large logs, so the saw is perfect for harvesting firewood. Since 2010, the manufacturer has been installing engines from Honda in the saw units, which significantly increases the engine life. However, some users note that sometimes there are chainsaws whose engine idles from time to time. However, these are isolated cases.

The anti-vibration system in the unit is presented in the form of powerful metal springs separating the body and handles, as well as rubber pads. Thanks to them, vibration is reduced and, as a result, the fatigue of the hands. The automatic oil pump independently adjusts the amount of lubricant supplied to the chain depending on the load. This made it possible to reduce oil consumption by 50% compared to saws, in which the lubricant is always supplied in one volume. The quick-release mount makes it possible to remove the lid without additional tools to replace the candle or clean the filter. A tank with a capacity of 550 mL will allow you to work for an hour without refilling fuel. For refueling, you can use 92nd or 95th gasoline and oil for two-stroke engines.

The German-made saw is equipped with a high-quality 400 mm tyre and a chain from Oregon. The chain with a 3/8” pitch is designed more for rough work, such as felling trees (you can also put a 0.325 chain). It is freely possible to cope with a tree up to 750 mm in diameter. The kit includes two chains at once with a step of 3/8. The saw is easy to perform sawing logs, crowning boots and pruning branches.

The model is equipped with a protective heat-reflecting metal (some models of other companies have plastic) screen in the working area of the muffler, thanks to which the engine does not overheat and as a result does not stall during operation. There is also a high-quality carburetor of the Japanese company Walbro. But so that it does not get clogged, from time to time you need to clean the filter that closes it from the "external" environment. By the way, thanks to the quick and easy access to the filter, you will be able to clean and change important components (spark plug and carburetor) of the device, if necessary, without contacting the service centre. However, it will be quite problematic to find these spare parts — only in regional centers or the capital.

The saw has a well-organized anti-vibration system, represented by a side spring on the front handle and a spring at the base on the back. Folding and inertial chain brakes will protect the operator from injury when the saw collides with a metal object. The model is equipped with a 390 mL fuel tank, which lasts for about 40 minutes or for cutting down two trees with a diameter of 500 mm, followed by sawing into chunks (it all depends on the height of the tree and the number of outgoing branches).

The flagship model of the Professional series is designed for sawing dry and wet wood, particle boards, planks, timber, harvesting decks for subsequent cutting for firewood. The protective cover of the starter and the tyre mounting cover are made of a special magnesium alloy, which is both lightweight, but at the same time durable (stronger than plastic). The remaining parts of the case are made of high-quality plastic.

The manufacturer has equipped the saw with an E-Start easy start system, thanks to which the effort applied when the device is started is reduced. Thus, you do not need to pull hard on the "smorgasbord" — it is enough to pull the cord smoothly, and the saw will start. Interestingly, the air flap opens automatically after pressing the throttle lever, so there is no need to constantly return it to its original position.

A pump is responsible for the lubrication of the chain, which automatically supplies oil to the working element. At the same time, the user himself can adjust the amount of oil supply by the pump. This is convenient when you have to cut a diverse material (for example, for sawing dry logs you need more oil than for wet wood). The 550 mL fuel tank (enough for 40 minutes of operation) has a transparent gasoline level indicator. Thanks to him, you will always see when it is necessary to top up fuel. The manufacturer has provided quick access to the candle and filter thanks to the opening lever on the housing. However, the filter itself is made of paper, so we recommend replacing it with foam over time. Also note that the saw weighs as much as 7.3 kg, which means you will have to take breaks quite often.

A chainsaw of Swedish origin is very convenient for long-term sawing of logs of small and medium diameters (for example, when harvesting firewood for the winter), since it weighs only 4.2 kg (without cutting equipment). The length of the tyre included in the kit is 380 mm, which allows it to cut down trees up to 700 mm in diameter. If desired, you can put a 350 mm long tyre, if there is a need to reduce weight or reduce dimensions to work in cramped circumstances.

The manufacturer has implemented Air Injection technology. This is a centrifugal air pre-purification system that increases the intervals between cleaning the filter element, thereby increasing its service life. By the way, you can clean the filter in a matter of minutes thanks to the quick-release attachment. In addition, the engine is manufactured using X-Torq technology, which, according to the manufacturer, provides reduced fuel consumption and produces less exhaust gases (a lot depends on the quality of gasoline here).

The fuel tank with a capacity of 370 mL is equipped with a transparent indicator, thanks to which the level of the gasoline-oil mixture is always visible. A full tank is enough for 30 minutes of work. The oil pump is responsible for the lubrication of the chain, which feeds the mixture automatically. Some users note that the oil tank leaks during the storage of the saw, so you always need to drain the oil after work. A pleasant moment is the availability of service services even in district centers, which means there will be no problems with repairs or finding spare parts. True, the buyer will have to immediately pay a considerable amount, but the saw will quickly work out the invested funds.