Atlantic Steatite VM 80 D400-2-BC
 |
 |
Atlantic Steatite VM 80 D400-2-BC | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Cylindrical domestic class electric storage water heater for vertical wall mounting indoors. It has standard overall dimensions with a body depth of 45 cm and a lower supply of communications (to save free space, it can be installed in the upper part of the wall, under the ceiling). Equipped with so-called "dry" tubular heating element with a power of 1500 W. At the same time, a durable heat-generating ceramic element is located in a special metal casing and does not have direct contact with water, which increases its service life.
In addition, this arrangement increases the heat transfer area, reduces the formation of insoluble deposits (scale). An additional advantage of this design was the possibility of replacing the heating element without dismantling the tank (no need to remove the flange). It takes about 2 hours and 45 minutes to heat an 80-liter volume at 50 °C. The water heater Atlantic Steatite VM 80 D400-2-BC is equipped with a special divider that reduces the mixing of incoming cold water with already heated water (which allows you to increase the output of hot water). The performance of the device is sufficient to organize a hot water supply system with several points of analysis. Can meet the household needs of a family of 2-3 people.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Atlantic 2025 - new arrivals, bestsellers, and the most relevant models Atlantic.
Buy Atlantic Steatite VM 80 D400-2-BC
All prices 52 →Atlantic Steatite Elite VM 080 D400-2-BC 851188 | 7 699 ₴ |  | |||
Водонагрівач (бойлер) Atlantic Steatite Elite VM 080 D400-2-BC (851188) | 7 900 ₴ |  | |||
| 7 899 ₴ |  | ||||
Водонагрівач Atlantic Steatite Elite VM 080 D400S-2-BC (1500W) (851407) | 8 499 ₴ |  | |||
Водонагрівач Atlantic Steatite Elite VM 080 D400-2-BC (851188) | 8 399 ₴ |  | |||
1 5 5 4 |
Nothing good heats up for a very long time before reaching the maximum temperature of 3 hours. Then when something stands in it, it creaks and groans inside and air appears. 65 degrees temperature is not enough. Up to this point, there was no such problem with wet shadows. It takes a long time to heat up and makes noise when idle. Assembly is not good. just bought Atlantic Steatite VM 80 D400-2-BC i recommend it don't buy |
Boiler as a boiler A year later, the tank leaked, and it worked like that use Atlantic Steatite VM 80 D400-2-BC month or more |
I specifically chose a model with "dry" heating elements because I heard they perform better in water with higher hardness. In our village, the artesian water is quite hard, and a regular electric kettle develops a significant layer of scale in just a week. Such hardness is dangerous for regular heating elements, and in the old water heater, they burned out with alarming frequency. So far, everything is fine here. A special, so-called "dry" tubular electric heater. It is not submerged in water but heats it through an additional wall. This means that scale does not form on the surface of the heating element, which is important in my case. Simple mechanical control. Unlike finicky electronics, it is reliable, "foolproof" and works steadily in our inconsistent electrical networks. The steel storage tank is well protected from corrosion. There is a special glass-ceramic coating and a magnesium anode for this purpose. There are protections against excessive pressure, overheating. Good thermal insulation. The casing hardly heats up. Reasonable price, compared to imported water heaters. Attractive appearance. Looks strict and modern. It takes quite a long time to heat the water "from scratch". The heating element is not very powerful, so a cold 80-liter tank heats up to the maximum 65 degrees in more than three hours. However, when it is constantly on, this does not cause much trouble. There's no switch. It would be convenient if there was an option to turn the heater on and off with a toggle or button right on the body. |
Atlantic Steatite VM 80 D400-2-BC configurations
| Price for Atlantic Steatite VM 80 D400-2-BC | ||||
|---|---|---|---|---|
 | Atlantic Steatite VM 50 D400-2-BC | from 5 991 ₴ | 55 offers | |
| Atlantic Steatite VM 80 D400-2-BC | from 6 569 ₴ | 52 offers | |
 | Atlantic Steatite VM 100 D400-2-BC | from 7 830 ₴ | 23 offers | |
Modest but tasteful
Water heater Atlantic Steatite VM 80 D400-2-BC looks like a regular household class electric boiler. In fact, despite some elegance (the French pedigree of the Atlantic company affects), nothing special is noticeable from the outside - a typical cylindrical boiler with a mechanical regulator and a round dial temperature indicator. And the characteristics are quite ordinary: power is 1500 W and water is heated to the maximum possible 65 ° C in 2 hours and 45 minutes. But a lot of interesting things are hidden under the snow-white glossy body. Immediately under the plastic shell is a layer of effective thermal insulation made of high-density polyurethane foam. It "envelops" a steel tank that holds 75 liters of liquid (quite enough to provide hot water to the average family). The tank is made of fairly thick steel (1.8 mm) and covered with enamel, which prevents direct metal contact with water, protecting the tank from corrosion.
Good choice for hard water areas
The most remarkable details of the boiler are hidden inside the tank. There is a magnesium anode, which helps the water heater last longer, and a “dry” heating element. The dry heating element, developed and patented by Atlantic, is a steel flask, inside of which there is a set of several heating coils and a couple of dozens of steatite blocks. This design of the heating element provides faster water heating (even compared to conventional tubular “dry” elements, not to mention “wet” heating elements) and significantly reduces the possibility for the development of corrosion processes that destroy the boiler tank from the inside. A combination of three protective systems (enamel, anode and a “dry” heating element) plus other solutions (for example, a dielectric coupling on a hot water pipe) allow the manufacturer to give an 8-year warranty on the tank of this boiler (among Atlantic water heaters, only a few models have such a large warranty) and 2 years for the electrical part. It should be noted that warranty obligations remain only under the condition of regular and timely service maintenance. But the boiler can be cleaned not every year (like most other water heaters), but once every 2 years due to the fact that less scale is formed in the tanks of devices with “dry” heating elements. Therefore, Atlantic Steatite VM 80 D400-2-BC is particularly well suited for hard water regions.
- Working pressure — 8 bar
