Bosch GSB 21-2 RCT Professional 060119C700
 |
 |
Close
Bosch GSB 21-2 RCT Professional 060119C700 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Powerful pistol impact drill with high maximum torque and dual speed for drilling a wide range of different materials. Positioned as a product of the upper price category, it is a professional hand-held power tool designed for intensive use. It will be an excellent choice for those who are used to doing their job quickly and with the highest quality. The Bosch GSB 21-2 RCT Professional 060119C700 impact drill is equipped with an electronic speed control Constant Electronic, which allows you to maintain a constant processing speed under heavy load.
Supports pre-setting of maximum torque for driving threaded fasteners. To select the optimal drilling mode, two rotation speeds are supported. The first, limited to 900 rpm, is perfect for drilling large holes in steels. Moreover, the diameter of the hole in such common structural grades can be up to 16 mm. The second speed mode, which involves the promotion of a keyless chuck up to 3000 rpm, is suitable for working with copper, aluminium and their alloys (brass, bronze, duralumin). Impact mode allows you to effectively punch holes in concrete up to 22 mm.
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Bosch 2025 - new arrivals, bestsellers, and the most relevant models Bosch.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Bosch 2025 - new arrivals, bestsellers, and the most relevant models Bosch.
Buy Bosch GSB 21-2 RCT Professional 060119C700
All prices 24 →| 15 192 ₴ |  | ||||
Дриль ударний Bosch Professional GSB 21-2 RCT у чемодані | 15 192 ₴ |  | |||
Ударная дрель Bosch GSB 21-2 RCT Professional 060119C700 | 10 829 ₴ |  | |||
Дриль ударний Bosch GSB 21-2 RCT Professional 060119C700 | 15 192 ₴ |  | |||
Дриль ударний Bosch GSB 21-2 RCT (060119C700) | 15 192 ₴ |  | |||
19 more offer(s)
Series Bosch Professional (blue)
laser level, 360° area, range: 30 m, with receiver 120 m, receiver optional, accuracy 0.3 mm/m, laser: red, class 2, auto power off
angle grinder, 750 W, saw blade 125 mm, 2800 – 11000 rpm, speed controller, additional handle
drill driver, gun, 1300 rpm, cartridge: keyless, Ø 10 mm, impact mode, reverse, motor brake, power supply: battery, 12 H, 1.5 Ah, 2, case
hammer drilling, 4000 bpm, without a hit, 900 rpm, chiselling, 800 W, 2.7 J, weight 2.7 kg
2300 W, from 50 °C, up to 650 °C, 500 L/min, stepless t control, stepless airflow control, preset modes, display, weight: 670 g, case, nozzles, 5
520 W, from 800 stroke/min, up to 3200 stroke/min, stroke: 20 mm, pendulum action, dust blower, case, weight: 2.29 kg
500 W, kernel: 11 mm, heat: in 4 min, up to 200 °С, supply: 30 g/min, replaceable nozzles, case
planing: width 82 mm, depth 4 mm, 850 W, soft start, double-sided knives, shoe, dual dust out system
laser level, 360° area, range: 30 m, with receiver 120 m, receiver optional, accuracy 0.3 mm/m, laser: green, class 2, auto power off
angle grinder, 900 W, saw blade 125 mm, 2800 – 11000 rpm, speed controller, additional handle
drill driver, gun, brushless motor, 400/1600 rpm, cartridge: keyless, Ø 10 mm, reverse, motor brake, power supply: battery, 12 H, 2 Ah, 2, case
hammer drilling, 4200 bpm, without a hit, 930 rpm, chiselling, 790 W, 2.7 J, weight 2.8 kg
Model overview based on user reviews
The Bosch GSB 21-2 RCT Professional 060119C700 is highly regarded for its powerful performance, often compared to a full-fledged hammer drill. It effectively drills through concrete with ease, thanks to its impact mode and two-speed settings. Users appreciate the consistent speed control and the convenience of the additional side handle. The drill's build quality is praised, with durable materials and a comfortable grip. However, some concerns include the spindle lock's reliability and the quick heating of the gearbox. Despite its high price, users find it a worthwhile investment for its quality and performance, although some note it is noisy compared to other models. Overall, it is recommended for those seeking a robust and reliable drill.
Pros
Cons
In general, the drill is good, but often overpriced for its capabilities and service life Powerful, two-speed Constant electronics, two modes Made in Switzerland (since 2017 - made in Hungary) Mode switch (with impact/without impact) - rotary, inside - in the form of a rod with a groove instead of a sliding plate - more sealed, less spindle backlash in non-impact mode Long cord Convenient front handle with rubber inserts (though they could have covered it entirely with rubber instead of two pieces) 1) The spindle lock does not inspire confidence in the indestructibility of the design (it may break, and it interferes with installing a powerful key chuck - there will be problems tightening with a key in different spots sequentially). 2) The spindle exit at the front is not protected by a felt insert, as seen in MUCH cheaper "no-name Chinese" models. 3) There are too few air intake slots at the back of the casing - the side ones are blocked by the pivoting bridge of the brush holder, and the ones at the top rear are partially blocked. 4) The gearbox heats up rather quickly, even when operating at idle, possibly due to insufficient air intake. Additionally, the enamel wire in the stator and rotor windings may not be the best, causing it to heat up quickly - at least the Metabo SBE 1100 Plus did not experience such heating at idle, even at higher speeds. 5) It is a bit noisy, especially from mid-speed onwards on both speeds - again, the Metabo is probably a third quieter and smoother (which indicates greater precision and technical quality, as equipment that works more quietly is generally of higher quality). use Bosch GSB 21-2 RCT Professional 060119C700 month or more |
Not a cheap price, but you pay for quality, I've had it for over half a year, no problems. Very easy to use, good materials for lining the handles, you never rub your hands. They didn’t come off quickly as happens in cheap drills. The power is enough for concrete without straining... I advise everyone to buy it, whoever is looking for a drill, don’t miss it. Plus the nonsense itself speaks for itself. the most powerful drill, it can even be called a full-fledged hammer drill, but only without one function it does not have the function of a jackhammer, and in terms of power and functions it is not inferior to anything, I drill concrete without any problems, the impact mode is so good .. there is no throwing in different directions, everything It's easy and stress-free. There is an excellent depth limiter that is placed nearby, but I don’t like it a little because it’s just an iron tube, but if there was a small spacer at the end that wouldn’t leave a mark on the wall it would be great. Large drill diameter, fast clamping. It is possible to supply an additional side handle... to be honest, this is more convenient for me than from below. You can use the trigger to adjust the rotation speed, of course you can’t replace a screwdriver... but still... the kit includes a case for it, a place to store a small set of drills... excellent and professional tool with great power..! there are no shortcomings!  Gost: just bought Bosch GSB 21-2 RCT Professional 060119C700 i recommend it should buy |
Add Review
Video reviews
We recommendCompare using chart →
drill, gun, 950 W, 3500 rpm, cartridge: keyless, Ø 13 mm, impact mode, reverse, power supply: mains (230 V), case
drill, gun, 1100 W, 3000 rpm, cartridge: keyless, Ø 13 mm, impact mode, reverse, power supply: mains (230 V), case
drill, gun, 1300 W, 1250/3500 rpm, cartridge: keyless, Ø 13 mm, impact mode, reverse, power supply: mains (230 V), case
drill, gun, 1650 W, 1200 rpm, 1 speed, cartridge: key, Ø 16 mm, impact mode, reverse, power supply: mains (230 V)
drill, gun, 680 W, 2800 rpm, 1 speed, cartridge: key, Ø 13 mm, impact mode, reverse, power supply: mains (230 V)
drill driver, gun, 320 W, 450/1500 rpm, cartridge: keyless, Ø 10 mm, impact mode, reverse, power supply: mains (230 V)
drill driver, gun, 360/1400 rpm, cartridge: bit holder and quick-release, Ø 10 mm, reverse, motor brake, power supply: battery, 10.8 H, 2 Ah, 2, case
impact wrench, gun, 1450 W, 2200 rpm, 1 speed, cartridge: square drive, 1/2 ", impact mode, reverse, power supply: mains (230 V), case
drill driver, gun, 350/1300 rpm, cartridge: keyless, Ø 10 mm, reverse, power supply: battery, 12 H, 1.3 Ah, 1
drill, gun, 500 W, 2800 rpm, 1 speed, cartridge: key, Ø 13 mm, impact mode, reverse, power supply: mains (230 V)
drill driver, gun, brushless motor, 450/1300/2000 rpm, cartridge: keyless, Ø 13 mm, impact mode, reverse, motor brake, power supply: battery, 18 H, 5 Ah, 2, case
drill driver, gun, brushless motor, 460/1800 rpm, cartridge: keyless, Ø 13 mm, impact mode, reverse, motor brake, power supply: battery, 18 H, 2 Ah, 2, case