Logicpower LPY-PSW-800VA Plus + LPM-MG 12V 100 Ah 800 VA 100 Ah battery MG 12 V 100 Ah
 |
 |
Close
Logicpower LPY-PSW-800VA Plus + LPM-MG 12V 100 Ah 800 VA 100 Ah battery MG 12 V 100 Ah 500 VA 32 Ah battery LiFePO4 12.8 V 32 Ah 500 VA 40 Ah battery GL 12 V 40 Ah 500 VA 40 Ah battery MG 12 V 40 Ah 500 VA 45 Ah 2 batteries GL 12 V 45 Ah 500 VA 45 Ah 2 MG batteries 12 V 45 Ah 500 VA 45 Ah battery MG 12 V 45 Ah 500 VA 50 Ah battery LiFePO4 12.8 V 50 Ah 500 VA 55 Ah battery MG 12 V 55 Ah 500 VA 64 Ah battery LiFePO4 LCD 12.8 V 64 Ah 500 VA 65 Ah battery GL 12 V 65 Ah 500 VA 65 Ah battery MG 12 V 65 Ah 500 VA 100 Ah battery LiFePO4 LCD 12.8 V 100 Ah 500 VA without battery 800 VA 45 Ah 2 batteries GL 12 V 45 Ah 800 VA 45 Ah 2 MG batteries 12 V 45 Ah 800 VA 100 Ah battery LiFePO4 LCD 12 V 100 Ah 800 VA 100 Ah battery MG 12 V 100 Ah 800 VA 120 Ah battery MG 12 V 120 Ah 800 VA without battery | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Includes Multigel 12 V 100 Ah battery.
How to choose UPS batteryWhat are the UPS battery technologies, how to calculate their required capacity and correctly take into account the charging current?
How to calculate the battery life of home and computer equipmentHow long will a conditional computer or refrigerator last from the UPS during power outages?
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Before buying always check characteristics and configuration of product with online store manager
Buy Logicpower LPY-PSW-800VA Plus + LPM-MG 12V 100 Ah 800 VA 100 Ah battery MG 12 V 100 Ah
All prices 6 →| 14 019 ₴ |  | ||||
Комплект резервного живлення LP (LogicPower) ДБЖ + мультигелева батарея (U | 14 019 ₴ |  | |||
Комплект резервного питания LP (LogicPower) ИБП + мультигелевая батарея (U | 14 019 ₴ |  | |||
LogicPower UPS 800VA + АКБ MG 1280W LP20340 | 14 019 ₴ |  | |||
Комплект резервного живлення LogicPower 800 + мультигелева батарея 1280 Ва | 14 019 ₴ |  | |||
| 14 019 ₴ |  | ||||
Series Logicpower Interactive (with LCD)Compare using chart →
smart, signal: sinusoid, power: 2200 VA, effective 1600 W, battery: 9 Ah, batteries 3, external battery connection, sockets: type F (Schuko), with reserve 2, C13/C14 with reserve
smart, signal: sinusoid, power: 1500 VA, effective 1050 W, battery: external battery connection, sockets: type F (Schuko), with reserve 2
smart, wall, signal: sinusoid, power: 3000 VA, effective 2000 W, battery: external battery connection, поддержка LiFePO4, sockets: type F (Schuko), with reserve 1, terminal blocks
smart, signal: sinusoid, power: 1500 VA, effective 1000 W, battery: external battery connection, поддержка LiFePO4, sockets: type F (Schuko), with reserve 2, terminal blocks
smart, signal: sinusoid, power: 1500 VA, effective 1050 W, battery: 35 Ah, batteries 2, external battery connection, sockets: type F (Schuko), with reserve 2
smart, signal: sinusoid, power: 1500 VA, effective 1050 W, battery: external battery connection, поддержка LiFePO4, sockets: type F (Schuko), with reserve 2
smart, wall, signal: sinusoid, power: 2500 VA, effective 1800 W, battery: external battery connection, поддержка LiFePO4, sockets: type F (Schuko), with reserve 2
smart, signal: sinusoid, power: 500 VA, effective 350 W, battery: external battery connection, поддержка LiFePO4, режим байпаса, sockets: type F (Schuko), with reserve 2
smart, signal: sinusoid, power: 500 VA, effective 350 W, battery: external battery connection, поддержка LiFePO4, режим байпаса, sockets: type F (Schuko), with reserve 2
smart, signal: sinusoid, power: 1500 VA, effective 1050 W, battery: external battery connection, sockets: type F (Schuko), with reserve 2
smart, signal: sinusoid, power: 3000 VA, effective 2100 W, battery: external battery connection, sockets: type F (Schuko), with reserve 3
smart, signal: sinusoid, power: 2300 VA, effective 1600 W, battery: external battery connection, поддержка LiFePO4, sockets: type F (Schuko), with reserve 2, terminal blocks
smart, signal: sinusoid, power: 1500 VA, effective 1050 W, battery: 200 Ah, batteries 1, external battery connection, sockets: type F (Schuko), with reserve 2
smart, signal: similar to a sinusoid, power: 850 VA, effective 510 W, battery: 8.5 Ah, batteries 1, sockets: type F (Schuko), with reserve 2
smart, wall, signal: sinusoid, power: 1000 VA, effective 700 W, battery: external battery connection, поддержка LiFePO4, sockets: type F (Schuko), with reserve 2
smart, signal: similar to a sinusoid, power: 825 VA, effective 577 W, battery: 9 Ah, batteries 1, sockets: type F (Schuko), with reserve 2
smart, signal: sinusoid, power: 500 VA, effective 350 W, battery: 65 Ah, batteries 1, external battery connection, поддержка LiFePO4, режим байпаса, sockets: type F (Schuko), with reserve 2
smart, wall, signal: sinusoid, power: 800 VA, effective 560 W, battery: external battery connection, поддержка LiFePO4, sockets: type F (Schuko), with reserve 1
smart, signal: similar to a sinusoid, power: 1550 VA, effective 1085 W, battery: 9 Ah, batteries 2, sockets: type F (Schuko), with reserve 3
smart, signal: sinusoid, power: 430 VA, effective 300 W, battery: 50 Ah, batteries 1, external battery connection, поддержка LiFePO4, sockets: type F (Schuko), with reserve 2, terminal blocks
Insure the operation circuit of this LPY-PSW-800VA+ DBZh and its analogues for the pressure and type - at your input voltage in the tank is 233 Volts - at the DBZH output will be 203 Volts. And when lowering the input voltage to 232 volts, you will take 232 volts at the output! Tobto. voltage strip 30 volts! Everything you need to know about the characteristic "Output voltage, V: 220 ± 10%. The characteristics "hour of switching-4-6 ms" do not work for the response of other household outbuildings in the range of DBZH Price, compactness 1. The range of switching output voltage is 30 Volts! 2. great hour of chanting |
Voltage dips in autumn reached 160-170 volts or less. And in winter, complete blackouts from 30 minutes to an hour, or even an hour and a half, were added to the failures. It knocked out at the substation, and not only because of our street, it turned out that the power supply of the new building of a small shopping center was brought to the substation. It was impossible to winter with such food. The stabilizer partially alleviated the problem, but the shutdowns stopped the gas boiler and left the house without heating. The issue was helped to solve the purchase and installation of such an uninterruptible power supply. This is an uninterruptible power supply and at the same time a good stabilizer that can rectify voltages from 150 to 270 volts. And for smooth operation, I bought an additional 40 Ah lead battery. The capacity may seem small, but the boiler also consumes a little, about 100 watts in active mode and at most 10 watts at rest. So for 2-2.5 hours it is enough. Well, if you wish, you can stretch this time up to six hours. To do this, you need to turn on the boiler for 40-50 minutes, followed by breaks for an hour. Fortunately, a cold start allows you to do such things with ease. Protects against voltage surges. Battery operation is accompanied by fan noise and it makes a decent noise. |
This uninterruptible power supply was purchased for the equipment of a mobile chemical laboratory mounted in the back of a minibus. There is not much equipment in it, but it is not always convenient and possible to use the car's electrical system as a current source. We have customers on the territory of which it is impossible to stand for a long time with the engine running. Such rules forced us to look for an alternative option for connecting equipment. And so this uninterruptible power supply, paired with a mighty 45-kilogram lead-acid battery, became an option. Its capacity is 150 ampere * hours, which, when translated from Chinese units of measurement into normal ones, turns into about 110. But even this is enough to power a pH meter, a spectrophotometer, a scale, a portable titration table with LED backlight, two laptops with one inkjet printer , and LED laboratory lighting. In total, the entire household draws approximately 270-300 watts of power, but of course, all these devices never work at once. So the real consumption fluctuates around 100-160 watts. Small size, this is important when installing in a limited volume of a mobile laboratory. It works clearly, at the output it gives a quite acceptable quality of a sinusoid and with a typical load of 100-160 watts it can last a very long time. In fact, we managed to work on it the whole working day, that is, about 6 hours of pure activity. If the customer has the opportunity to supply power to the machine, then the uninterruptible power supply turns into a reliable and functional stabilizer. He knows how to correct the voltage at the output, despite the fact that the input can be from 150 to 260 volts. The efficiency could be higher. And he hums, wow! The fan starts as soon as battery operation or charging starts and spins all the time. I got used to it for a long time, infuriated me wildly. |
Add Review
Video reviews
Logicpower LPY-PSW-800VA Plus + LPM-MG 12V 100 Ah configurations
| Price for Logicpower LPY-PSW-800VA Plus + LPM-MG 12V 100 Ah | ||||
|---|---|---|---|---|
 | Logicpower LPY-PSW-500VA Plus + LP LiFePO4 12.8V 32 Ah 500 VA 32 Ah battery LiFePO4 12.8 V 32 Ah | from 11 212 ₴ | 4 offers | |
 | Logicpower LPY-PSW-500VA Plus + LPM-GL 12V 40 Ah 500 VA 40 Ah battery GL 12 V 40 Ah | from 8 566 ₴ | 5 offers | |
 | Logicpower LPY-PSW-500VA Plus + LPM-MG 12V 40 Ah 500 VA 40 Ah battery MG 12 V 40 Ah | from 8 236 ₴ | 1 offer | |
 | Logicpower LPY-PSW-500VA Plus + 2 x LPM-GL 12V 45 Ah 500 VA 45 Ah 2 batteries GL 12 V 45 Ah | from 15 595 ₴ | 2 offers | |
 | Logicpower LPY-PSW-500VA Plus + 2 x LPM-MG 12V 45 Ah 500 VA 45 Ah 2 MG batteries 12 V 45 Ah | from 13 823 ₴ | 3 offers | |
 | Logicpower LPY-PSW-500VA Plus + LPM-MG 12V 45 Ah 500 VA 45 Ah battery MG 12 V 45 Ah | from 9 105 ₴ | 7 offers | |
 | Logicpower LPY-PSW-500VA Plus + LP LiFePO4 12.8V 50 Ah 500 VA 50 Ah battery LiFePO4 12.8 V 50 Ah | from 15 591 ₴ | 1 offer | |
 | Logicpower LPY-PSW-500VA Plus + LPM-MG 12V 55 Ah 500 VA 55 Ah battery MG 12 V 55 Ah | from 9 938 ₴ | 4 offers | |
 | Logicpower LPY-PSW-500VA Plus + LP LiFePO4 LCD 12.8V 64 Ah 500 VA 64 Ah battery LiFePO4 LCD 12.8 V 64 Ah | from 16 837 ₴ | 2 offers | |
 | Logicpower LPY-PSW-500VA Plus + LPM-GL 12V 65 Ah 500 VA 65 Ah battery GL 12 V 65 Ah | from 11 052 ₴ | 6 offers | |
 | Logicpower LPY-PSW-500VA Plus + LPM-MG 12V 65 Ah 500 VA 65 Ah battery MG 12 V 65 Ah | from 10 469 ₴ | 7 offers | |
 | Logicpower LPY-PSW-500VA Plus + LP LiFePO4 LCD 12.8V 100 Ah 500 VA 100 Ah battery LiFePO4 LCD 12.8 V 100 Ah | from 24 319 ₴ | 2 offers | |
 | Logicpower LPY-PSW-500VA Plus 500 VA without battery | from 4 009 ₴ | 75 offers | |
 | Logicpower LPY-PSW-800VA Plus + 2 x LPM-GL 12V 45 Ah 800 VA 45 Ah 2 batteries GL 12 V 45 Ah | from 16 705 ₴ | 3 offers | |
 | Logicpower LPY-PSW-800VA Plus + 2 x LPM-MG 12V 45 Ah 800 VA 45 Ah 2 MG batteries 12 V 45 Ah | from 14 185 ₴ | 3 offers | |
 | Logicpower LPY-PSW-800VA Plus + LP LiFePO4 LCD 12V 100 Ah 800 VA 100 Ah battery LiFePO4 LCD 12 V 100 Ah | from 25 200 ₴ | 5 offers | |
| Logicpower LPY-PSW-800VA Plus + LPM-MG 12V 100 Ah 800 VA 100 Ah battery MG 12 V 100 Ah | from 14 019 ₴ | 6 offers | |
 | Logicpower LPY-PSW-800VA Plus + LPM-MG 12V 120 Ah 800 VA 120 Ah battery MG 12 V 120 Ah | from 15 505 ₴ | 2 offers | |
 | Logicpower LPY-PSW-800VA Plus 800 VA without battery | from 4 949 ₴ | 65 offers | |
SimilarCompare using chart →
smart, signal: sinusoid, power: 1000 VA, battery: external battery connection, sockets: type F (Schuko), with reserve 2
smart, signal: sinusoid, power: 800 VA, effective 560 W, battery: 45 Ah, batteries 2, external battery connection, поддержка LiFePO4, режим байпаса, sockets: type F (Schuko), with reserve 2
smart, signal: sinusoid, power: 800 VA, effective 480 W, battery: external battery connection, sockets: type F (Schuko), with reserve 1
smart, signal: sinusoid, power: 800 VA, effective 560 W, battery: 100 Ah, batteries 1, external battery connection, поддержка LiFePO4, режим байпаса, sockets: type F (Schuko), with reserve 2
smart, signal: sinusoid, power: 1000 VA, effective 700 W, battery: external battery connection, sockets: type F (Schuko), with reserve 2
smart, signal: sinusoid, power: 1000 VA, effective 700 W, battery: external battery connection, sockets: type F (Schuko), with reserve 2
smart, signal: sinusoid, power: 1000 VA, effective 600 W, battery: 60 Ah, batteries 1, external battery connection, поддержка LiFePO4, sockets: type F (Schuko), with reserve 2, terminal blocks
smart, signal: sinusoid, power: 1000 VA, effective 1000 W, battery: external battery connection, sockets: type F (Schuko), with reserve 2, USB A
smart, signal: sinusoid, power: 1000 VA, effective 1000 W, battery: external battery connection, поддержка LiFePO4, sockets: type F (Schuko), with reserve 2
smart, signal: similar to a sinusoid, power: 3000 VA, effective 1800 W, battery: 9 Ah, batteries 4, sockets: type F (Schuko), with reserve 4
smart, signal: similar to a sinusoid, power: 2000 VA, effective 1200 W, battery: 9 Ah, batteries 2, sockets: type F (Schuko), with reserve 4
inverter UPS, signal: sinusoid, power: 2000 VA, effective 1400 W, battery: 7.5 Ah, batteries 8, режим байпаса, sockets: type F (Schuko), with reserve 4