Luxeon WDS-8000VA SERVO 8 kVA / 5600 W
 | 12 500 ₴ Buy!  Стабилизатор напряжения Luxeon WDS-8000Technofox.com.ua6 year with us (Kyiv) Warranty: 24 month Report |
 |
Close
Luxeon WDS-8000VA SERVO 8 kVA / 5600 W
Type:electromechanical
Power:8 kVA, active 5600 W
Input voltage:140-260 V
Efficiency:97 %
Output accuracy (±):3 %
Cooling:passive
Mount:wall
All specifications
1 1 2 0 |
The stabilizer has been in operation since 2009. Noisy work. use Luxeon WDS-10000VA SERVO month or more i recommend it should buy |
I chose the stabilizer for the house for a long time and there were two important reasons for this. First, it had to be a stabilizer that kept the correct, clean sine wave. This is required by our home heating gas boiler, or rather its automation. Judging by the reviews of the owners of this Valiant line, relay devices create power surges when switching and automation often goes into protection. So relay stabilizers disappeared immediately. The second requirement for the device concerned accuracy, I wanted to have the "correct" 220-230V, no more, no less. It would seem that the worse 210 or 240 volts, this is also almost the norm. But in practice, it turns out that even a small increase in voltage from the standard one significantly reduces the life of LED and gas-discharge lamps. So - "Do not think down about volts!" ))) Fitted me in every way. It can equalize both low and high mains voltage, operating range from 140 to 260 volts. In such harsh conditions, I have not tested it, my range is from 160 to 230 volts. The stabilization accuracy is chic, it consistently produces 224V plus or minus 2-3 volts. All equipment protected by him works like clockwork. Powerful, designed for 8 kW of power. But this is Chinese technology, so I didn’t load it to the fullest and don’t plan to. I can only say that he stabilized a long-term load of 4 kilowatts quickly and almost silently. Warmed weakly. Low stabilization speed with a sharp dip or power surge. Like all servo-driven devices, this one has a small sound from the operation of the drive, but you can hear it only at night. |
2 out of 4 user review(s) shown
2 more user review(s)
Video reviews
Стабилизатор напряжения Luxeon WDS-10000 сервоприводный, обзор
25 June 20156 462 view
Стабилизатор напряжения Luxeon WDS-8000 сервоприводный, обзор
6 July 20153 099 view
Luxeon WDS-8000VA SERVO configurations
| Price for Luxeon WDS-8000VA SERVO | ||||
|---|---|---|---|---|
 | Luxeon WDS-5500VA SERVO 5 kVA / 3850 W | from 8 037 ₴ | 6 offers | |
| Luxeon WDS-8000VA SERVO 8 kVA / 5600 W | from 12 500 ₴ | 1 offer | |
 | Luxeon WDS-10000VA SERVO 10 kVA / 7000 W | from 10 573 ₴ | 6 offers | |
We recommendCompare using chart →
wall, electromechanical, 10 kVA, 7000 W, Efficiency 97 %, voltage: 140-260 V, accuracy: 3 %, LC-filter
wall, electromechanical, 10 kVA, 8000 W, Efficiency 98 %, voltage: 120-275 V, accuracy: 1.5 %
electromechanical, 10 kVA, 8000 W, Efficiency 98 %, voltage: 120-275 V, accuracy: 1.5 %
Torore. It’s a problem with voltage and sometimes below -150 volts. Without a stabilizer, the gas boiler refuses to work at such moments, and the microwave oven does not work at all.
go himself (launched a powerful compressor in the garage) When using such things or welding, I recommend turning off the stub.