Franke FTC 6032 BK black
 |
 |
Close
Franke FTC 6032 BK black | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Franke 2025 - new arrivals, bestsellers, and the most relevant models Franke.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Franke 2025 - new arrivals, bestsellers, and the most relevant models Franke.
How to choose a cooker hoodSecrets of choosing a cooker hood that will fit all parameters and last for many years
How to clean the hoodIt is important not only the external cleanliness and attractiveness of the hood, but also the condition of its internal parts.
Buy Franke FTC 6032 BK black
All prices 6 →Витяжка Franke FTC 6032 2V BK V3 | 4 774 ₴ |  | |||
| 4 669 ₴ |  | ||||
| 5 287 ₴ |  | ||||
| 4 722 ₴ |  | ||||
| 4 716 ₴ |  | ||||
| 4 719 ₴ |  | ||||
Series Franke FlexaCompare using chart →
built-in (in cabinet), with sliding panel, flow: for air extraction 702 m³/h, width 89.8 cm
built-in (in cabinet), with sliding panel, flow: for air extraction 420 m³/h, width 60 cm
built-in (in cabinet), with sliding panel, flow: for air extraction 310 m³/h, width 59.8 cm
built-in (in cabinet), with sliding panel, flow: for air extraction 420 m³/h, width 60 cm
built-in (in cabinet), with sliding panel, flow: for air extraction 310 m³/h, width 49.8 cm
built-in (in cabinet), with sliding panel, flow: for air extraction 310 m³/h, width 59.8 cm
built-in (in cabinet), with sliding panel, flow: for air extraction 300 m³/h, width 50 cm
built-in (in cabinet), with sliding panel, flow: for air extraction 510 m³/h, width 60 cm
built-in (in cabinet), with sliding panel, flow: for air extraction 510 m³/h, width 60 cm
built-in (in cabinet), with sliding panel, flow: for air extraction 380 m³/h, width 60 cm
built-in (in cabinet), with sliding panel, flow: for air extraction 380 m³/h, width 60 cm
built-in (in cabinet), with sliding panel, flow: for air extraction 510 m³/h, width 60 cm
built-in (in cabinet), with sliding panel, flow: for air extraction 420 m³/h, width 49.8 cm
built-in (in cabinet), with sliding panel, flow: for air extraction 390 m³/h, width 90 cm
built-in (in cabinet), with sliding panel, flow: for air extraction 380 m³/h, width 60 cm
built-in (in cabinet), with sliding panel, flow: for air extraction 420 m³/h, width 60 cm
built-in (in cabinet), with sliding panel, flow: for air extraction 310 m³/h, width 59.8 cm
built-in (in cabinet), with sliding panel, flow: for air extraction 310 m³/h, width 49.8 cm
2 0 2 0 |
The exhaust is bad. It pulls very poorly. The bolts on the bottom were all rusted from moisture. The slider control is broken. I called the services and they can’t find out and fix it for me. There are no spare parts. It is fastened from below along the perimeter with many self-tapping screws - at first we did not pay attention to the handicraft assembly. When they began to rust from the moisture that rises from the pans, they realized that cheap cheese is only in a mousetrap. The most disappointing thing was the slider controls! It simply broke and quickly. Now the hood can be turned on only by connecting the wire to the socket and immediately on the 3rd speed!!! use Franke FTC 6032 GR/XS few months |
After replacing the kitchen furniture, there was less money left for appliances than originally planned, and good appliances are now expensive, as you already know. I chose this inexpensive model for its size, performance and, of course, price. Affordable sliding model for installation in a hanging cabinet. When unfolded, it covers almost the entire cooking surface and thereby effectively collects all hot air, water vapor and odors from this surface. It can also work in recirculation mode, which is designed to combat strong odors. It has a turbine fan installed, which ensures high performance and a relatively low noise level. At maximum speed, of course, it makes a decent noise, but compared to the old dual-fan model that I had before and during which it was impossible to speak, this is just a completely different league. There are three speeds, and the first of them can be called quite quiet. There is also a powerful backlight for the hob. The hood is controlled by conventional, simple and reliable slide switches. There are minor complaints about the assembly (gaps between parts). I wanted to find carbon filters for it and ran into problems with availability and high prices. So for now I'm doing without recycling. I was also surprised by the lighting on obsolete halogen lamps. With similar luminosity, LED backlights outperform them in all respects. |
2 out of 5 user review(s) shown
3 more user review(s)
Franke FTC 6032 BK configurations
| Price for Franke FTC 6032 BK | ||||
|---|---|---|---|---|
| Franke FTC 6032 BK black | from 4 669 ₴ | 6 offers | |
 | Franke FTC 6032 GR/XS stainless steel | from 5 203 ₴ | 1 offer | |
 | Franke FTC 6032 WH white | from 4 666 ₴ | 6 offers | |
We recommendCompare using chart →
built-in (in cabinet), with sliding panel, flow: for air extraction 420 m³/h, width 60 cm
built-in (in cabinet), with sliding panel, flow: for air extraction 510 m³/h, width 60 cm
built-in (in cabinet), with sliding panel, flow: for air extraction 294 m³/h, width 60 cm
built-in (in cabinet), with sliding panel, flow: for air extraction 420 m³/h, width 60 cm
built-in (in cabinet), with sliding panel, flow: for air extraction 152 m³/h, width 60 cm
built-in (in cabinet), with sliding panel, flow: for air extraction 310 m³/h, width 59.8 cm
built-in (in cabinet), with sliding panel, flow: 750 m³/h, for air extraction 350 m³/h, width 59.8 cm
built-in (in cabinet), with sliding panel, flow: for air extraction 180 m³/h, width 60 cm